SMART MODE:

NORMAL GENOMIC

• Tang H, Ou JF, Zhu MJ
• Development of a quantitative real-time PCR assay for direct detection of growth of cellulose-degrading bacterium Clostridium thermocellum in lignocellulosic degradation.
• J Appl Microbiol. 2015; 118: 1333-44
• Display abstract

• AIMS: Currently, there is no direct method for detecting Clostridium thermocellum in the insoluble medium. In this study, a quantitative real-time PCR assay was developed for the direct growth detection of C. thermocellum at the single-cell level in lignocellulosic biomasses. METHODS AND RESULTS: The assay targeted the cipA gene and was able to distinguish C. thermocellum from other species with good reproducibility which quantitative detection limit was 10 cell equivalents (CE) per reaction. OD600-based counting and qPCR quantification of C. thermocellum cultured in soluble medium were compared and an excellent consistency was revealed, indicating the appropriateness of the developed qPCR method. Analysis based on yellow affinity substrate and fermentation products may incorrectly estimate its population. CONCLUSIONS: The developed assay can serve as a specific, sensitive and reproducible method for the detection of C. thermocellum in lignocellulosic biomass at the single-cell level. SIGNIFICANCE AND IMPACT OF THE STUDY: With the ability to rapidly detect C. thermocellum, this method will contribute substantially to the understanding of the lignocellulosic biomass degradation mechanism. Moreover, it can also be applied to detect C. thermocellum growth in certain co-culture system for the understanding of the metabolic interactions.

• Artzi L, Morag E, Barak Y, Lamed R, Bayer EA
• Clostridium clariflavum: Key Cellulosome Players Are Revealed by Proteomic Analysis.
• MBio. 2015; 6: 41115-41115
• Display abstract

• Clostridium clariflavum is an anaerobic, cellulosome-forming thermophile, containing in its genome genes for a large number of cellulosomal enzyme and a complex scaffoldin system. Previously, we described the major cohesin-dockerin interactions of the cellulosome components, and on this basis a model of diverse cellulosome assemblies was derived. In this work, we cultivated C. clariflavum on cellobiose-, microcrystalline cellulose-, and switchgrass-containing media and isolated cell-free cellulosome complexes from each culture. Gel filtration separation of the cellulosome samples revealed two major fractions, which were analyzed by label-free liquid chromatography-tandem mass spectrometry (LC-MS/MS) in order to identify the key players of the cellulosome assemblies therein. From the 13 scaffoldins present in the C. clariflavum genome, 11 were identified, and a variety of enzymes from different glycoside hydrolase and carbohydrate esterase families were identified, including the glycoside hydrolase families GH48, GH9, GH5, GH30, GH11, and GH10. The expression level of the cellulosomal proteins varied as a function of the carbon source used for cultivation of the bacterium. In addition, the catalytic activity of each cellulosome was examined on different cellulosic substrates, xylan and switchgrass. The cellulosome isolated from the microcrystalline cellulose-containing medium was the most active of all the cellulosomes that were tested. The results suggest that the expression of the cellulosome proteins is regulated by the type of substrate in the growth medium. Moreover, both cell-free and cell-bound cellulosome complexes were produced which together may degrade the substrate in a synergistic manner. These observations are compatible with our previously published model of cellulosome assemblies in this bacterium. IMPORTANCE: Because the reservoir of unsustainable fossil fuels, such as coal, petroleum, and natural gas, is overutilized and continues to contribute to environmental pollution and CO2 emission, the need for appropriate alternative energy sources becomes more crucial. Bioethanol produced from dedicated crops and cellulosic waste can provide a partial answer, yet a cost-effective production method must be developed. The cellulosome system of the anaerobic thermophile C. clariflavum comprises a large number of cellulolytic and hemicellulolytic enzymes, which self-assemble in a number of different cellulosome architectures for enhanced cellulosic biomass degradation. Identification of the major cellulosomal components expressed during growth of the bacterium and their influence on its catalytic capabilities provide insight into the performance of the remarkable cellulosome of this intriguing bacterium. The findings, together with the thermophilic characteristics of the proteins, render C. clariflavum of great interest for future use in industrial cellulose conversion processes.

• Zhang P, Wang B, Xiao Q, Wu S
• A kinetics modeling study on the inhibition of glucose on cellulosome of Clostridium thermocellum.
• Bioresour Technol. 2015; 190: 36-43
• Display abstract

• A simplified kinetics model was built to study the inhibition of glucose on cellulosome of Clostridium thermocellum. Suitable reaction conditions were adopted to evaluate the model. The model was evaluated at different temperatures and further with various activated carbon additions as adsorbent for glucose. Investigation results revealed that the model could describe the hydrolysis kinetics of cellulose by cellulosome quite well. Glucose was found to be an inhibitor for cellulosome based on the kinetics analysis. Inhibition increased with the increase in temperature. Activated carbon as adsorbent could lower the inhibition. Parameters in the model were further discussed based on the experiment. The model might also be used to describe the strong inhibition of cellobiose on cellulosome. Saccharification of cellulose by both cellulosome and C. thermocellum could be enhanced efficiently by activated carbon addition.

• Mukherjee S et al.
• Population level analysis of evolved mutations underlying improvements in plant hemicellulose and cellulose fermentation by Clostridium phytofermentans.
• PLoS One. 2014; 9: 86731-86731
• Display abstract

• BACKGROUND: The complexity of plant cell walls creates many challenges for microbial decomposition. Clostridium phytofermentans, an anaerobic bacterium isolated from forest soil, directly breaks down and utilizes many plant cell wall carbohydrates. The objective of this research is to understand constraints on rates of plant decomposition by Clostridium phytofermentans and identify molecular mechanisms that may overcome these limitations. RESULTS: Experimental evolution via repeated serial transfers during exponential growth was used to select for C. phytofermentans genotypes that grow more rapidly on cellobiose, cellulose and xylan. To identify the underlying mutations an average of 13,600,000 paired-end reads were generated per population resulting in approximately 300 fold coverage of each site in the genome. Mutations with allele frequencies of 5% or greater could be identified with statistical confidence. Many mutations are in carbohydrate-related genes including the promoter regions of glycoside hydrolases and amino acid substitutions in ABC transport proteins involved in carbohydrate uptake, signal transduction sensors that detect specific carbohydrates, proteins that affect the export of extracellular enzymes, and regulators of unknown specificity. Structural modeling of the ABC transporter complex proteins suggests that mutations in these genes may alter the recognition of carbohydrates by substrate-binding proteins and communication between the intercellular face of the transmembrane and the ATPase binding proteins. CONCLUSIONS: Experimental evolution was effective in identifying molecular constraints on the rate of hemicellulose and cellulose fermentation and selected for putative gain of function mutations that do not typically appear in traditional molecular genetic screens. The results reveal new strategies for evolving and engineering microorganisms for faster growth on plant carbohydrates.

• Kostylev M et al.
• Cel48A from Thermobifida fusca: structure and site directed mutagenesis of key residues.
• Biotechnol Bioeng. 2014; 111: 664-73
• Display abstract

• Lignocellulosic biomass is a potential source of sustainable transportation fuels, but efficient enzymatic saccharification of cellulose is a key challenge in its utilization. Cellulases from the glycoside hydrolase (GH) family 48 constitute an important component of bacterial biomass degrading systems and structures of three enzymes from this family have been previously published. We report a new crystal structure of TfCel48A, a reducing end directed exocellulase from Thermobifida fusca, which shows that this enzyme shares important structural features with the other members of the GH48 family. The active site tunnel entrance of the known GH48 exocellulases is enriched in aromatic residues, which are known to interact well with anhydroglucose units of cellulose. We carried out site-directed mutagenesis studies of these aromatic residues (Y97, F195, Y213, and W313) along with two non-aromatic residues (N212 and S311) also located around the tunnel entrance and a W315 residue inside the active site tunnel. Only the aromatic residues located around the tunnel entrance appear to be important for the ability of TfCel48A to access individual cellulose chains on bacterial cellulose (BC), a crystalline substrate. Both Trp residues were found to be important for the processivity of TfCel48A on BC and phosphoric acid swollen cellulose (PASC), but only W313 appears to play a role in the ability of the enzyme to access individual cellulose chains in BC. When acting on BC, reduced processivity was found to correlate with reduced enzyme activity. The reverse, however, is true when PASC is the substrate. Presumably, higher density of available cellulose chain ends and the amorphous nature of PASC explain the increased initial activity of mutants with lower processivity.

• Morgan JL, Strumillo J, Zimmer J
• Crystallographic snapshot of cellulose synthesis and membrane translocation.
• Nature. 2013; 493: 181-6
• Display abstract

• Cellulose, the most abundant biological macromolecule, is an extracellular, linear polymer of glucose molecules. It represents an essential component of plant cell walls but is also found in algae and bacteria. In bacteria, cellulose production frequently correlates with the formation of biofilms, a sessile, multicellular growth form. Cellulose synthesis and transport across the inner bacterial membrane is mediated by a complex of the membrane-integrated catalytic BcsA subunit and the membrane-anchored, periplasmic BcsB protein. Here we present the crystal structure of a complex of BcsA and BcsB from Rhodobacter sphaeroides containing a translocating polysaccharide. The structure of the BcsA-BcsB translocation intermediate reveals the architecture of the cellulose synthase, demonstrates how BcsA forms a cellulose-conducting channel, and suggests a model for the coupling of cellulose synthesis and translocation in which the nascent polysaccharide is extended by one glucose molecule at a time.

• Waeonukul R et al.
• Novel cellulase recycling method using a combination of Clostridium thermocellum cellulosomes and Thermoanaerobacter brockii beta-glucosidase.
• Bioresour Technol. 2013; 130: 424-30
• Display abstract

• This report describes a novel recycling method utilizing a combination of Clostridium thermocellum cellulosomes and Thermoanaerobacter brockii beta-glucosidase (CglT). To recover cellulosomes and CglT through re-binding to additional cellulose, a chimeric CBM3-CglT was created by fusing carbohydrate binding module (CBM3) from the scaffolding protein CipA into the N-terminal region of CglT. When a recycling test using cellulosomes and CBM3-CglT was performed on microcrystalline cellulose, the process was capable of 4 rounds of recycling (1%w/vcellulose/round). Although irreversible absorption of cellulosomes and CBM3-CglT into the residues was observed when ammonia-pretreated rice straw and delignified rice straw was used as substrates, a maximum of 2 and 4 recycling rounds (1%w/vglucan/round) were achieved, respectively, consistent with a 70% saccharification rate. This novel recycling method using cellulosomes and CBM3-CglT has great potential as an effective lignocellulose degradation system.

• Bauer R, Wilson JJ, Philominathan ST, Davis D, Matsushita O, Sakon J
• Structural comparison of ColH and ColG collagen-binding domains from Clostridium histolyticum.
• J Bacteriol. 2013; 195: 318-27
• Display abstract

• Clostridium histolyticum secretes collagenases, ColG and ColH, that cause extensive tissue destruction in myonecrosis. The C-terminal collagen-binding domain (CBD) of collagenase is required for insoluble collagen fibril binding and subsequent collagenolysis. The high-resolution crystal structures of ColG-CBD (s3b) and ColH-CBD (s3) are reported in this paper. The new X-ray structure of s3 was solved at 2.0-A resolution (R = 17.4%; R(free) = 23.3%), while the resolution of the previously determined s3b was extended to 1.4 A (R = 17.9%; R(free) = 21.0%). Despite sharing only 30% sequence identity, the molecules resemble one another closely (root mean square deviation [RMSD] C(alpha) = 1.5 A). All but one residue, whose side chain chelates with Ca(2+), are conserved. The dual Ca(2+) binding site in s3 is completed by an unconserved aspartate. Differential scanning calorimetric measurements showed that s3 gains thermal stability, comparable to s3b, by binding to Ca(2+) (holo T(m) = 94.1 degrees C; apo T(m) = 70.2 degrees C). holo s3 is also stabilized against chemical denaturants urea and guanidine HCl. The three most critical residues for collagen interaction in s3b are conserved in s3. The general shape of the binding pocket is retained by altered loop structures and side chain positions. Small-angle X-ray scattering data revealed that s3 also binds asymmetrically to minicollagen. Besides the calcium-binding sites and the collagen-binding pocket, architecturally important hydrophobic residues and the hydrogen-bonding network around the cis-peptide bond are well conserved within the metallopeptidase subfamily M9B. CBDs were previously shown to bind to the extracellular matrix of various tissues. Compactness and extreme stability in physiological Ca(2+) concentration possibly make both CBDs suitable for targeted growth factor delivery.

• Blumer-Schuette SE et al.
• Caldicellulosiruptor core and pangenomes reveal determinants for noncellulosomal thermophilic deconstruction of plant biomass.
• J Bacteriol. 2012; 194: 4015-28
• Display abstract

• Extremely thermophilic bacteria of the genus Caldicellulosiruptor utilize carbohydrate components of plant cell walls, including cellulose and hemicellulose, facilitated by a diverse set of glycoside hydrolases (GHs). From a biofuel perspective, this capability is crucial for deconstruction of plant biomass into fermentable sugars. While all species from the genus grow on xylan and acid-pretreated switchgrass, growth on crystalline cellulose is variable. The basis for this variability was examined using microbiological, genomic, and proteomic analyses of eight globally diverse Caldicellulosiruptor species. The open Caldicellulosiruptor pangenome (4,009 open reading frames [ORFs]) encodes 106 GHs, representing 43 GH families, but only 26 GHs from 17 families are included in the core (noncellulosic) genome (1,543 ORFs). Differentiating the strongly cellulolytic Caldicellulosiruptor species from the others is a specific genomic locus that encodes multidomain cellulases from GH families 9 and 48, which are associated with cellulose-binding modules. This locus also encodes a novel adhesin associated with type IV pili, which was identified in the exoproteome bound to crystalline cellulose. Taking into account the core genomes, pangenomes, and individual genomes, the ancestral Caldicellulosiruptor was likely cellulolytic and evolved, in some cases, into species that lost the ability to degrade crystalline cellulose while maintaining the capacity to hydrolyze amorphous cellulose and hemicellulose.

• Cheng G et al.
• Interactions of endoglucanases with amorphous cellulose films resolved by neutron reflectometry and quartz crystal microbalance with dissipation monitoring.
• Langmuir. 2012; 28: 8348-58
• Display abstract

• A study of the interaction of four endoglucanases with amorphous cellulose films by neutron reflectometry (NR) and quartz crystal microbalance with dissipation monitoring (QCM-D) is reported. The endoglucanases include a mesophilic fungal endoglucanase (Cel45A from H. insolens), a processive endoglucanase from a marine bacterium (Cel5H from S. degradans ), and two from thermophilic bacteria (Cel9A from A. acidocaldarius and Cel5A from T. maritima ). The use of amorphous cellulose is motivated by the promise of ionic liquid pretreatment as a second generation technology that disrupts the native crystalline structure of cellulose. The endoglucanases displayed highly diverse behavior. Cel45A and Cel5H, which possess carbohydrate-binding modules (CBMs), penetrated and digested within the bulk of the films to a far greater extent than Cel9A and Cel5A, which lack CBMs. While both Cel45A and Cel5H were active within the bulk of the films, striking differences were observed. With Cel45A, substantial film expansion and interfacial broadening were observed, whereas for Cel5H the film thickness decreased with little interfacial broadening. These results are consistent with Cel45A digesting within the interior of cellulose chains as a classic endoglucanase, and Cel5H digesting predominantly at chain ends consistent with its designation as a processive endoglucanase.

• Wei H et al.
• Tracking dynamics of plant biomass composting by changes in substrate structure, microbial community, and enzyme activity.
• Biotechnol Biofuels. 2012; 5: 20-20
• Display abstract

• BACKGROUND: Understanding the dynamics of the microbial communities that, along with their secreted enzymes, are involved in the natural process of biomass composting may hold the key to breaking the major bottleneck in biomass-to-biofuels conversion technology, which is the still-costly deconstruction of polymeric biomass carbohydrates to fermentable sugars.However, the complexity of both the structure of plant biomass and its counterpart microbial degradation communities makes it difficult to investigate the composting process. RESULTS: In this study, a composter was set up with a mix of yellow poplar (Liriodendron tulipifera) wood-chips and mown lawn grass clippings (85:15 in dry-weight) and used as a model system. The microbial rDNA abundance data obtained from analyzing weekly-withdrawn composted samples suggested population-shifts from bacteria-dominated to fungus-dominated communities. Further analyses by an array of optical microscopic, transcriptional and enzyme-activity techniques yielded correlated results, suggesting that such population shifts occurred along with early removal of hemicellulose followed by attack on the consequently uncovered cellulose as the composting progressed. CONCLUSION: The observed shifts in dominance by representative microbial groups, along with the observed different patterns in the gene expression and enzymatic activities between cellulases, hemicellulases, and ligninases during the composting process, provide new perspectives for biomass-derived biotechnology such as consolidated bioprocessing (CBP) and solid-state fermentation for the production of cellulolytic enzymes and biofuels.

• Georgelis N, Yennawar NH, Cosgrove DJ
• Structural basis for entropy-driven cellulose binding by a type-A cellulose-binding module (CBM) and bacterial expansin.
• Proc Natl Acad Sci U S A. 2012; 109: 14830-5
• Display abstract

• Components of modular cellulases, type-A cellulose-binding modules (CBMs) bind to crystalline cellulose and enhance enzyme effectiveness, but structural details of the interaction are uncertain. We analyzed cellulose binding by EXLX1, a bacterial expansin with ability to loosen plant cell walls and whose domain D2 has type-A CBM characteristics. EXLX1 strongly binds to crystalline cellulose via D2, whereas its affinity for soluble cellooligosaccharides is weak. Calorimetry indicated cellulose binding was largely entropically driven. We solved the crystal structures of EXLX1 complexed with cellulose-like oligosaccharides to find that EXLX1 binds the ligands through hydrophobic interactions of three linearly arranged aromatic residues in D2. The crystal structures revealed a unique form of ligand-mediated dimerization, with the oligosaccharide sandwiched between two D2 domains in opposite polarity. This report clarifies the molecular target of expansin and the specific molecular interactions of a type-A CBM with cellulose.

• Carugo O
• Participation of protein sequence termini in crystal contacts.
• Protein Sci. 2011; 20: 2121-4
• Display abstract

• The analysis of the crystal packing interactions, in a nonredundant set of high resolution and monomeric globular protein crystal structures, shows that the residues located at the N- and C-termini of the sequence tend to participate in packing interaction more often than expected and that often they interact with each other. Since the sequence termini are, in general, conformationally very flexible and since they host electrical charges of opposite sign, it can be hypothesized that they play a crucial role in the early formation of the nonphysiological contacts that bring to protein crystallization. It is thus not surprising that modest lengthening/shortening of the sequence termini have often a dramatic effect on protein crystallogenesis.

• Yaniv O, Shimon LJ, Bayer EA, Lamed R, Frolow F
• Scaffoldin-borne family 3b carbohydrate-binding module from the cellulosome of Bacteroides cellulosolvens: structural diversity and significance of calcium for carbohydrate binding.
• Acta Crystallogr D Biol Crystallogr. 2011; 67: 506-15
• Display abstract

• The potent cellulose-binding modules of cellulosomal scaffoldin subunits belong to the greater family of carbohydrate-binding modules (CBMs). They have generally been classified as belonging to family 3a on the basis of sequence similarity. They form nine-stranded beta-sandwich structures with jelly-roll topology. The members of this family possess on their surface a planar array of aromatic amino-acid residues (known as the linear strip) that form stacking interactions with the glucose rings of cellulose chains and have a conserved Ca(2+)-binding site. Intriguingly, the CBM3 from scaffoldin A (ScaA) of Bacteroides cellulosolvens exhibits alterations in sequence that make it more similar to the CBMs of free cellulolytic enzymes, which are classified into CBM family 3b. X-ray structural analysis was undertaken in order to examine the structural consequences of the sequence changes and the consequent family affiliation. The CBM3 crystallized in space group I4(1)22 with one molecule in the asymmetric unit, yielding diffraction to a resolution of 1.83 A using X-ray synchrotron radiation. Compared with the known structures of other scaffoldin-borne CBMs, a sequence insertion and deletion appear to compensate for each other as both contained an aromatic residue that is capable of contributing to cellulose binding; hence, even though there are alterations in the composition and localization of the aromatic residues in the linear strip its binding ability was not compromised. Interestingly, no Ca(2+) ions were detected in the conserved calcium-binding site, although the module was properly folded; this suggests that the structural role of Ca(2+) is less important than originally supposed. These observations indicate that despite their conserved function the scaffoldin-borne CBMs are more diverse in their sequences and structures than previously assumed.

• Molinier AL, Nouailler M, Valette O, Tardif C, Receveur-Brechot V, Fierobe HP
• Synergy, structure and conformational flexibility of hybrid cellulosomes displaying various inter-cohesins linkers.
• J Mol Biol. 2011; 405: 143-57
• Display abstract

• Cellulosomes are large extracellular multi-enzyme complexes that exhibit elevated activity on plant cell-wall polysaccharides. In the present study, the relationships between the conformational flexibility and efficacy of cellulosomes, and the inter-modules linkers of their scaffold protein were investigated. For this purpose, the length of the intrinsically disordered Ser/Thr-rich 50-residue linker connecting a Clostridium thermocellum and a Clostridium cellulolyticum cohesin in a hybrid scaffoldin (Scaf4) was changed by sequences ranging from 4 to 128 residues. The composition was also modified and new linkers composed of series of N, S or repeats of the EPPV motif were generated. Two model cellulases (Cel48F and Cel9G) appended with appropriate dockerins were subsequently bound to the engineered scaffoldins. All the resulting minicomplexes displayed the same activity on crystalline cellulose as the complex based on the initial Scaf4, and were found to be 2-fold more active than Cel48F and Cel9G bound to separate cohesins. Small-angle X-ray scattering assays of the engineered scaffoldins confirmed, however, that the size and the conformational flexibility of some of the new inter-cohesins linkers differed significantly from that of the initial 50 residue linker displayed by the parental Scaf4. Our data suggest that the synergy induced by proximity does not require a specific inter-cohesins sequence or distance. The present study reveals that complexation onto the hybrid scaffoldins modifies the type of soluble sugars released from crystalline cellulose by the selected cellulases, compared to the free enzyme system.

• Lu Y et al.
• Characterization of the effective cellulose degrading strain CTL-6.
• J Environ Sci (China). 2011; 23: 649-55
• Display abstract

• An efficient cellulose degrading bacteria exists in the thermophilic wheat straw-degrading community, WDC2. However, this strain cannot be isolated and cultured using conventional separation techniques under strict anaerobic conditions. We successfully isolated a strain of effective cellulose degrading bacteria CTL-6 using a wash, heat shock, and solid-liquid alternating process. Analysis of its properties revealed that, although the community containing the strain CTL-6 grew under aerobic conditions, the purified strain CTL-6 only grew under anaerobic culture conditions. The strain CTL-6 had a striking capability of degrading cellulose (80.9% weight loss after 9 days of culture). The highest efficiency value of the endocellulase (CMCase activity) was 0.404 micromol/(min mL), cellulose degradation efficiency by CTL-6 was remarkably high at 50-65 degrees C with the highest degradation efficiency observed at 60 degrees C. The 16S rRNA gene sequence analysis indicated that the closest relative to strain CTL-6 belonged to the genus Clostridium thermocellum. Strain CTL-6 was capable of utilizing cellulose, cellobiose, and glucose. Strain CTL-6 also grew with Sorbitol as the sole carbon source, whereas C. thermocellum is unable to do so.

• Olson DG et al.
• Deletion of the Cel48S cellulase from Clostridium thermocellum.
• Proc Natl Acad Sci U S A. 2010; 107: 17727-32
• Display abstract

• Clostridium thermocellum is a thermophilic anaerobic bacterium that rapidly solubilizes cellulose with the aid of a multienzyme cellulosome complex. Creation of knockout mutants for Cel48S (also known as CelS, S(S), and S8), the most abundant cellulosome subunit, was undertaken to gain insight into its role in enzymatic and microbial cellulose solubilization. Cultures of the Cel48S deletion mutant (S mutant) were able to completely solubilize 10 g/L crystalline cellulose. The cellulose hydrolysis rate of the S mutant strain was 60% lower than the parent strain, with the S mutant strain also exhibiting a 40% reduction in cell yield. The cellulosome produced by the S mutant strain was purified by affinity digestion, characterized enzymatically, and found to have a 35% lower specific activity on Avicel. The composition of the purified cellulosome was analyzed by tandem mass spectrometry with APEX quantification and no significant changes in abundance were observed in any of the major (>1% of cellulosomal protein) enzymatic subunits. Although most cellulolytic bacteria have one family 48 cellulase, C. thermocellum has two, Cel48S and Cel48Y. Cellulose solubilization by a Cel48S and Cel48Y double knockout was essentially the same as that of the Cel48S single knockout. Our results indicate that solubilization of crystalline cellulose by C. thermocellum can proceed to completion without expression of a family 48 cellulase.

• Su X et al.
• Mutational insights into the roles of amino acid residues in ligand binding for two closely related family 16 carbohydrate binding modules.
• J Biol Chem. 2010; 285: 34665-76
• Display abstract

• Carbohydrate binding modules (CBMs) are specialized proteins that bind to polysaccharides and oligosaccharides. Caldanaerobius polysaccharolyticus Man5ACBM16-1/CBM16-2 bind to glucose-, mannose-, and glucose/mannose-configured substrates. The crystal structures of the two proteins represent the only examples in CBM family 16, and studies that evaluate the roles of amino acid residues in ligand binding in this family are lacking. In this study, we probed the roles of amino acids (selected based on CBM16-1/ligand co-crystal structures) on substrate binding. Two tryptophan (Trp-20 and Trp-125) and two glutamine (Gln-81 and Gln-93) residues are shown to be critical in ligand binding. Additionally, several polar residues that flank the critical residues also contribute to ligand binding. The CBM16-1 Q121E mutation increased affinity for all substrates tested, whereas the Q21G and N97R mutants exhibited decreased substrate affinity. We solved CBM/substrate co-crystal structures to elucidate the molecular basis of the increased substrate binding by CBM16-1 Q121E. The Gln-121, Gln-21, and Asn-97 residues can be manipulated to fine-tune ligand binding by the Man5A CBMs. Surprisingly, none of the eight residues investigated was absolutely conserved in CBM family 16. Thus, the critical residues in the Man5A CBMs are either not essential for substrate binding in the other members of this family or the two CBMs are evolutionarily distinct from the members available in the current protein database. Man5A is dependent on its CBMs for robust activity, and insights from this study should serve to enhance our understanding of the interdependence of its catalytic and substrate binding modules.

• Gilbert HJ
• The biochemistry and structural biology of plant cell wall deconstruction.
• Plant Physiol. 2010; 153: 444-55

• Morais S et al.
• Contribution of a xylan-binding module to the degradation of a complex cellulosic substrate by designer cellulosomes.
• Appl Environ Microbiol. 2010; 76: 3787-96
• Display abstract

• Conversion of components of the Thermobifida fusca free-enzyme system to the cellulosomal mode using the designer cellulosome approach can be employed to discover the properties and inherent advantages of the cellulosome system. In this article, we describe the conversion of the T. fusca xylanases Xyn11A and Xyn10B and their synergistic interaction in the free state or within designer cellulosome complexes in order to enhance specific degradation of hatched wheat straw as a model for a complex cellulosic substrate. Endoglucanase Cel5A from the same bacterium and its recombinant dockerin-containing chimera were also studied for their combined effect, together with the xylanases, on straw degradation. Synergism was demonstrated when Xyn11A was combined with Xyn10B and/or Cel5A, and approximately 1.5-fold activity enhancements were achieved by the designer cellulosome complexes compared to the free wild-type enzymes. These improvements in activity were due to both substrate-targeting and proximity effects among the enzymes contained in the designer cellulosome complexes. The intrinsic cellulose/xylan-binding module (XBM) of Xyn11A appeared to be essential for efficient substrate degradation. Indeed, only designer cellulosomes in which the XBM was maintained as a component of Xyn11A achieved marked enhancement in activity compared to the combination of wild-type enzymes. Moreover, integration of the XBM in designer cellulosomes via a dockerin module (separate from the Xyn11A catalytic module) failed to enhance activity, suggesting a role in orienting the parent xylanase toward its preferred polysaccharide component of the complex wheat straw substrate. The results provide novel mechanistic insight into the synergistic activity of designer cellulosome components on natural plant cell wall substrates.

• Xu C et al.
• Factors influencing cellulosome activity in consolidated bioprocessing of cellulosic ethanol.
• Bioresour Technol. 2010; 101: 9560-9
• Display abstract

• The cellulosome, a multi-subunit protein complex catalyzing cellulose degradation in cellulolytic Clostridium thermocellum, plays a crucial role in Consolidated Bioprocessing (CBP) of lignocellulose into ethanol. Here, activity of cellulosome was tested under varying concentrations of chemical compounds derived from lignocellulose pretreatment and fermentation. We found that, firstly, the cellulolytic activity of cellulosome was actually promoted by formate, acetate and lactate; secondly, cellulosome was tolerant up to 5mM furfural, 50mM p-hydroxybenzoic acid and 1mM catechol. Furthermore, the cellulosome exhibited higher ethanol tolerance and thermostability than commercialized fungal (Trichoderma reesei) cellulase. To probe the implication of these unique enzyme-features, C. thermocellum JYT01 was cultured under conditions optimal for cellulosome activity. This CBP system yielded 491 mM ethanol, the highest level reported thus far for C. thermocellum monocultures. These findings demonstrate the potential advantages of bacterial cellulosome, and provide a novel strategy for design, selection and optimization of the cellulosome-ethanologen partnership.

• Lacayo CI et al.
• Imaging cell wall architecture in single Zinnia elegans tracheary elements.
• Plant Physiol. 2010; 154: 121-33
• Display abstract

• The chemical and structural organization of the plant cell wall was examined in Zinnia elegans tracheary elements (TEs), which specialize by developing prominent secondary wall thickenings underlying the primary wall during xylogenesis in vitro. Three imaging platforms were used in conjunction with chemical extraction of wall components to investigate the composition and structure of single Zinnia TEs. Using fluorescence microscopy with a green fluorescent protein-tagged Clostridium thermocellum family 3 carbohydrate-binding module specific for crystalline cellulose, we found that cellulose accessibility and binding in TEs increased significantly following an acidified chlorite treatment. Examination of chemical composition by synchrotron radiation-based Fourier-transform infrared spectromicroscopy indicated a loss of lignin and a modest loss of other polysaccharides in treated TEs. Atomic force microscopy was used to extensively characterize the topography of cell wall surfaces in TEs, revealing an outer granular matrix covering the underlying meshwork of cellulose fibrils. The internal organization of TEs was determined using secondary wall fragments generated by sonication. Atomic force microscopy revealed that the resulting rings, spirals, and reticulate structures were composed of fibrils arranged in parallel. Based on these combined results, we generated an architectural model of Zinnia TEs composed of three layers: an outermost granular layer, a middle primary wall composed of a meshwork of cellulose fibrils, and inner secondary wall thickenings containing parallel cellulose fibrils. In addition to insights in plant biology, studies using Zinnia TEs could prove especially productive in assessing cell wall responses to enzymatic and microbial degradation, thus aiding current efforts in lignocellulosic biofuel production.

• Chitayat S et al.
• Three-dimensional structure of a putative non-cellulosomal cohesin module from a Clostridium perfringens family 84 glycoside hydrolase.
• J Mol Biol. 2008; 375: 20-8
• Display abstract

• The genomes of myonecrotic strains of Clostridium perfringens encode a large number of secreted glycoside hydrolases. The activities of these enzymes are consistent with degradation of the mucosal layer of the human gastrointestinal tract, glycosaminoglycans and other cellular glycans found throughout the body. In many cases this is thought to aid in the propagation of the major toxins produced by C. perfringens. One such example is the family 84 glycoside hydrolases, which contains five C. perfringens members (CpGH84A-E), each displaying a unique modular architecture. The smallest and most extensively studied member, CpGH84C, comprises an N-terminal catalytic domain with beta-N-acetylglucosaminidase activity, a family 32 carbohydrate-binding module, a family 82 X-module (X82) of unknown function, and a fibronectin type-III-like module. Here we present the structure of the X82 module from CpGH84C, determined by both NMR spectroscopy and X-ray crystallography. CpGH84C X82 adopts a jell-roll fold comprising two beta-sheets formed by nine beta-strands. CpGH84C X82 displays distant amino acid sequence identity yet close structural similarity to the cohesin modules of cellulolytic anaerobic bacteria. Cohesin modules are responsible for the assembly of numerous hydrolytic enzymes in a cellulose-degrading multi-enzyme complex, termed the cellulosome, through a high-affinity interaction with the calcium-binding dockerin module. A planar surface is located on the face of the CpGH84 X82 structure that corresponds to the dockerin-binding region of cellulolytic cohesin modules and has the approximate dimensions to accommodate a dockerin module. The presence of cohesin-like X82 modules in glycoside hydrolases of C. perfringens is an indication that the formation of novel X82-dockerin mediated multi-enzyme complexes, with potential roles in pathogenesis, is possible.

• Zverlov VV, Klupp M, Krauss J, Schwarz WH
• Mutations in the scaffoldin gene, cipA, of Clostridium thermocellum with impaired cellulosome formation and cellulose hydrolysis: insertions of a new transposable element, IS1447, and implications for cellulase synergism on crystalline cellulose.
• J Bacteriol. 2008; 190: 4321-7
• Display abstract

• Mutants of Clostridium thermocellum that had lost the ability to adhere to microcrystalline cellulose were isolated. Six of them that showed diminished ability to depolymerize crystalline cellulose were selected. Size exclusion chromatography of the proteins from the culture supernatant revealed the loss of the supramolecular enzyme complex, the cellulosome. However, denaturing sodium dodecyl sulfate-polyacrylamide gel electrophoresis resulted in extracellular protein patterns comparable to those of isolated cellulosomes, except for a missing CipA band. Sequencing of the six mutant cipA genes revealed a new insertion (IS) element, IS1447, belonging to the IS3 family. It was inserted into the cipA reading frame in four different locations: cohesin module 1, two different positions in the carbohydrate binding module, and cohesin module 3. The IS sequences were identical and consisted of a transposase gene and the inverted repeats IRR and IRS. The insertion resulted in an obviously nonspecific duplication of 3 base pairs within the target sequence. This lack of specificity allows transposition without the need of a defined target DNA sequence. Eighteen copies of IS1447 were identified in the genomic sequence of C. thermocellum ATCC 27405. At least one of them can be activated for transposition. Compared to the wild type, the mutant culture supernatant, with a completely defective CipA protein, showed equal specific hydrolytic activity against soluble beta-glucan but a 15-fold reduction in specific activity with crystalline cellulose. These results identify a genetic basis for the synergistic effect of complex formation on crystalline-cellulose degradation.

• Li Y, Irwin DC, Wilson DB
• Processivity, substrate binding, and mechanism of cellulose hydrolysis by Thermobifida fusca Cel9A.
• Appl Environ Microbiol. 2007; 73: 3165-72
• Display abstract

• Thermobifida fusca Cel9A-90 is a processive endoglucanase consisting of a family 9 catalytic domain (CD), a family 3c cellulose binding module (CBM3c), a fibronectin III-like domain, and a family 2 CBM. This enzyme has the highest activity of any individual T. fusca enzyme on crystalline substrates, particularly bacterial cellulose (BC). Mutations were introduced into the CD or the CBM3c of Cel9A-68 using site-directed mutagenesis. The mutant enzymes were expressed in Escherichia coli; purified; and tested for activity on four substrates, ligand binding, and processivity. The results show that H125 and Y206 play an important role in activity by forming a hydrogen bonding network with the catalytic base, D58; another important supporting residue, D55; and Glc(-1) O1. R378, a residue interacting with Glc(+1), plays an important role in processivity. Several enzymes with mutations in the subsites Glc(-2) to Glc(-4) had less than 15% activity on BC and markedly reduced processivity. Mutant enzymes with severalfold-higher activity on carboxymethyl cellulose (CMC) were found in the subsites from Glc(-2) to Glc(-4). The CBM3c mutant enzymes, Y520A, R557A/E559A, and R563A, had decreased activity on BC but had wild-type or improved processivity. Mutation of D513, a conserved residue at the end of the CBM, increased activity on crystalline cellulose. Previous work showed that deletion of the CBM3c abolished crystalline activity and processivity. This study shows that it is residues in the catalytic cleft that control processivity while the CBM3c is important for loose binding of the enzyme to the crystalline cellulose substrate.

• Meier R, Drepper T, Svensson V, Jaeger KE, Baumann U
• A calcium-gated lid and a large beta-roll sandwich are revealed by the crystal structure of extracellular lipase from Serratia marcescens.
• J Biol Chem. 2007; 282: 31477-83
• Display abstract

• Lipase LipA from Serratia marcescens is a 613-amino acid enzyme belonging to family I.3 of lipolytic enzymes that has an important biotechnological application in the production of a chiral precursor for the coronary vasodilator diltiazem. Like other family I.3 lipases, LipA is secreted by Gram-negative bacteria via a type I secretion system and possesses 13 copies of a calcium binding tandem repeat motif, GGXGXDXUX (U, hydrophobic amino acids), in the C-terminal part of the polypeptide chain. The 1.8-A crystal structure of LipA reveals a close relation to eukaryotic lipases, whereas family I.1 and I.2 enzymes appear to be more distantly related. Interestingly, the structure shows for the N-terminal lipase domain a variation on the canonical alpha/beta hydrolase fold in an open conformation, where the putative lid helix is anchored by a Ca(2+) ion essential for activity. Another novel feature observed in this lipase structure is the presence of a helical hairpin additional to the putative lid helix that exposes a hydrophobic surface to the aqueous medium and might function as an additional lid. The tandem repeats form two separated parallel beta-roll domains that pack tightly against each other. Variations of the consensus sequence of the tandem repeats within the second beta-roll result in an asymmetric Ca(2+) binding on only one side of the roll. The analysis of the properties of the beta-roll domains suggests an intramolecular chaperone function.

• Shoseyov O, Shani Z, Levy I
• Carbohydrate binding modules: biochemical properties and novel applications.
• Microbiol Mol Biol Rev. 2006; 70: 283-95
• Display abstract

• Polysaccharide-degrading microorganisms express a repertoire of hydrolytic enzymes that act in synergy on plant cell wall and other natural polysaccharides to elicit the degradation of often-recalcitrant substrates. These enzymes, particularly those that hydrolyze cellulose and hemicellulose, have a complex molecular architecture comprising discrete modules which are normally joined by relatively unstructured linker sequences. This structure is typically comprised of a catalytic module and one or more carbohydrate binding modules (CBMs) that bind to the polysaccharide. CBMs, by bringing the biocatalyst into intimate and prolonged association with its substrate, allow and promote catalysis. Based on their properties, CBMs are grouped into 43 families that display substantial variation in substrate specificity, along with other properties that make them a gold mine for biotechnologists who seek natural molecular "Velcro" for diverse and unusual applications. In this article, we review recent progress in the field of CBMs and provide an up-to-date summary of the latest developments in CBM applications.

• Adams JJ, Jang CJ, Spencer HL, Elliott M, Smith SP
• Expression, purification and structural characterization of the scaffoldin hydrophilic X-module from the cellulosome of Clostridium thermocellum.
• Protein Expr Purif. 2004; 38: 258-63
• Display abstract

• The cellulosome is a membrane-bound, extracellular multi-subunit complex responsible for the degradation of crystalline cellulose by a number of organisms including anaerobic bacteria and fungi. The hydrophilic X-module (CipA-X) from the modular scaffoldin subunit of Clostridium thermocellum cellulosome has been proposed to play various roles in cellulosomal function, including thermal and structural stability. Towards elucidating the function of CipA-X using structural and biophysical studies, the region comprising residues 1692-1785 from the C. thermocellum CipA cDNA encoding CipA-X was cloned into a pET21b expression vector. When expressed in Escherichia coli, the C-terminal His-tagged protein accumulated in the insoluble fraction. Cell fractionation experiments showed that the recombinant protein was localized to inclusion bodies. Refolding and purification involved denaturation of the whole cell lysate by addition of urea, followed by a nickel-Sepharose chromatography step and dialysis into native conditions (25 mM Tris-HCl, pH 7.4, 50 mM NaCl, and 10 mM EDTA). A final gel filtration step purified the protein to homogeneity, yielding 40 mg/L. The two-dimensional 1H-15N correlation spectrum of uniformly 15N-labelled CipA-X showed the characteristics of a well-folded protein comprising significant beta-structure, which is in agreement with the circular dichroism data.

• Ghosh J, Postle K
• Evidence for dynamic clustering of carboxy-terminal aromatic amino acids in TonB-dependent energy transduction.
• Mol Microbiol. 2004; 51: 203-13
• Display abstract

• Escherichia coli uses the proton motive force of the cytoplasmic membrane and TonB protein to energize the active transport of iron-siderophores and vitamin B12 across the outer membrane. TonB shuttles between the cytoplasmic and outer membranes, presumably during the course of energy transduction. Previous results indicated that the carboxy-terminal 65 amino acids of TonB are essential for both its outer membrane association and activity. A highly conserved region (residues 199-216) within this domain, predicted to be an amphipathic alpha-helix, was the initial focus of this study. Scanning mutagenesis indicated that only the aromatic residues F202, W213 and Y215 were individually important for activity. When the crystal structure of a dimeric TonB carboxy-terminus subsequently became available, we observed that two additional aromatic residues outside that region, F180 and F230, were potentially engaged in end-on hydrophobic interactions with the three residues identified previously. Changing these five aromatic residues individually to alanine reduced TonB activity. Surprisingly, however, each substitution exhibited a unique phenotypic profile with respect to ability to support [55Fe]-ferrichrome transport, sensitivity to colicins B, D, Ia and M or sensitivity to bacteriophage phi80. The phenotypic results suggested that the carboxy-terminus of TonB was a flexible and dynamic domain that could interact specifically with different ligands or transporters, perhaps through the aromatic residues. The possibility of interactions among all the aromatic residues was tested using double-mutant cycle analysis. All possible combinations of alanine substitutions were constructed, with the result that TonB containing any double-alanine substitution was inactive in the phenotypic assays, while retaining the ability to associate with the outer membrane. This synergistic, rather than additive, effect of the double mutants suggested that, consistent with the flexibility suggested by analysis of the single substitutions, all the aromatic residues might be capable of interacting with one another. A means of reconciling these results with the crystal structure is presented.

• Schubot FD et al.
• Structural basis for the exocellulase activity of the cellobiohydrolase CbhA from Clostridium thermocellum.
• Biochemistry. 2004; 43: 1163-70
• Display abstract

• Numerous bacterial and fungal organisms have evolved elaborate sets of modular glycoside hydrolases and similar enzymes aimed at the degradation of polymeric carbohydrates. Presently, on the basis of sequence similarity catalytic modules of these enzymes have been classified into 90 families. Representatives of a particular family display similar fold and catalytic mechanisms. However, within families distinctions occur with regard to enzymatic properties and type of activity against carbohydrate chains. Cellobiohydrolase CbhA from Clostridium thermocellum is a large seven-modular enzyme with a catalytic module belonging to family 9. In contrast to other representatives of that family possessing only endo- and, in few cases, endo/exo-cellulase activities, CbhA is exclusively an exocellulase. The crystal structures of the combination of the immunoglobulin-like module and the catalytic module of CbhA (Ig-GH9_CbhA) and that of an inactive mutant Ig-GH9_CbhA(E795Q) in complex with cellotetraose (CTT) are reported here. The detailed analysis of these structures reveals that, while key catalytic residues and overall fold are conserved in this enzyme and those of other family 9 glycoside hydrolases, the active site of GH9_CbhA is blocked off after the -2 subsite. This feature which is created by an extension and altered conformation of a single loop region explains the inability of the active site of CbhA to accommodate a long cellulose chain and to cut it internally. This altered loop region is responsible for the exocellulolytic activity of the enzyme.

• Doi RH, Kosugi A, Murashima K, Tamaru Y, Han SO
• Cellulosomes from mesophilic bacteria.
• J Bacteriol. 2003; 185: 5907-14

• Walter S, Schrempf H
• Oligomerization, membrane anchoring, and cellulose-binding characteristics of AbpS, a receptor-like Streptomyces protein.
• J Biol Chem. 2003; 278: 26639-47
• Display abstract

• Streptomyces reticuli produces a 34.6-kDa surface-anchored protein (AbpS) whose surface-exposed N terminus binds strongly to Avicel, a dominantly crystalline type of cellulose. The generation of a large set of mutated abpS-genes and the subsequent analysis of the corresponding proteins in vitro as well as in vivo in a Streptomyces host allow the assignment of the following characteristics for AbpS. (i) Amino acid residues participating directly in the cellulose-interaction are located at the N terminus. (ii) As ascertained by cross-linking experiments, AbpS forms homotetramers in its soluble as well as cellulose-bound form. (iii) The intermolecular assembly of four AbpS molecules is governed by two domains (including amino acids 60-110 and 161-212). Both domains possess large portions of alpha-helical regions in which hydrophobic amino acids are located on one side as known from coiled-coil proteins. (iv) The C-terminal part of AbpS comprising 35 amino acids contains a transmembrane domain. Due to the surface-exposed N terminus of AbpS and the presence of transmembrane helix the C terminus has to be situated in the cytoplasm of the S. reticuli hyphae. Thus AbpS connects the interior of the mycelia with the extracellular space and binds cellulose using a unique cellulose-binding module.

• Gilad R et al.
• CelI, a noncellulosomal family 9 enzyme from Clostridium thermocellum, is a processive endoglucanase that degrades crystalline cellulose.
• J Bacteriol. 2003; 185: 391-8
• Display abstract

• The family 9 cellulase gene celI of Clostridium thermocellum, was previously cloned, expressed, and characterized (G. P. Hazlewood, K. Davidson, J. I. Laurie, N. S. Huskisson, and H. J. Gilbert, J. Gen. Microbiol. 139:307-316, 1993). We have recloned and sequenced the entire celI gene and found that the published sequence contained a 53-bp deletion that generated a frameshift mutation, resulting in a truncated and modified C-terminal segment of the protein. The enzymatic properties of the wild-type protein were characterized and found to conform to those of other family 9 glycoside hydrolases with a so-called theme B architecture, where the catalytic module is fused to a family 3c carbohydrate-binding module (CBM3c); CelI also contains a C-terminal CBM3b. The intact recombinant CelI exhibited high levels of activity on all cellulosic substrates tested, with pH and temperature optima of 5.5 and 70 degrees C, respectively, using carboxymethylcellulose as a substrate. Native CelI was capable of solubilizing filter paper, and the distribution of reducing sugar between the soluble and insoluble fractions suggests that the enzyme acts as a processive cellulase. A truncated form of the enzyme, lacking the C terminal CBM3b, failed to bind to crystalline cellulose and displayed reduced activity toward insoluble substrates. A truncated form of the enzyme, in which both the cellulose-binding CBM3b and the fused CBM3c were removed, failed to exhibit significant levels of activity on any of the substrates examined. This study underscores the general nature of this type of enzymatic theme, whereby the fused CBM3c plays a critical accessory role for the family 9 catalytic domain and changes its character to facilitate processive cleavage of recalcitrant cellulose substrates.

• Kataeva IA, Seidel RD 3rd, Shah A, West LT, Li XL, Ljungdahl LG
• The fibronectin type 3-like repeat from the Clostridium thermocellum cellobiohydrolase CbhA promotes hydrolysis of cellulose by modifying its surface.
• Appl Environ Microbiol. 2002; 68: 4292-300
• Display abstract

• Fibronectin type 3 homology domains (Fn3) as found in the cellobiohydrolase CbhA of Clostridium thermocellum are common among bacterial extracellular glycohydrolases. The function of these domains is not clear. CbhA is modular and composed of an N-terminal family IV carbohydrate-binding domain (CBDIV), an immunoglobulin-like domain, a family 9 glycosyl hydrolase catalytic domain (Gh9), two Fn3-like domains (Fn3(1,2)), a family III carbohydrate-binding domain (CBDIII), and a dockerin domain. Efficiency of cellulose hydrolysis by truncated forms of CbhA increased in the following order: Gh9 (lowest efficiency), Gh9-Fn3(1,2) (more efficient), and Gh9-Fn3(1,2)-CBDIII (greatest efficiency). Thermostability of the above constructs decreased in the following order: Gh9 (most stable), Gh9-Fn3(1,2), and then Gh9-Fn3(1,2)-CBDIII (least stable). Mixing of Orpinomyces endoglucanase CelE with Fn3(1,2,) or Fn3(1,2)-CBDIII increased efficiency of hydrolysis of acid-swollen cellulose (ASC) and filter paper. Scanning electron microscopic studies of filter paper treated with Fn3(1,2), Fn3(1,2)-CBDIII, or CBDIII showed that the surface of the cellulose fibers had been loosened up and crenellated by Fn3(1,2) and Fn3(1,2)-CBDIII and to a lesser extent by CBDIII. X-ray diffraction analysis did not reveal changes in the crystallinity of the filter paper. CBDIII bound to ASC and filter paper with capacities of 2.45 and 0.73 micro moles g(-1) and relative affinities (K(r)) of 1.12 and 2.13 liters g(-1), respectively. Fn3(1,2) bound weakly to both celluloses. Fn3(1,2)-CBD bound to ASC and filter paper with capacities of 3.22 and 0.81 micro moles g(-1) and K(r)s of 1.14 and 1.98 liters g(-1), respectively. Fn3(1,2) and CBDIII contained 2 and 1 mol of calcium per mol, respectively. The results suggest that Fn3(1,2) aids the hydrolysis of cellulose by modifying its surface. This effect is enhanced by the presence of CBDIII, which increases the concentration of Fn3(1,2) on the cellulose surface.

• Velloso LM, Svensson K, Schneider G, Pettersson RF, Lindqvist Y
• Crystal structure of the carbohydrate recognition domain of p58/ERGIC-53, a protein involved in glycoprotein export from the endoplasmic reticulum.
• J Biol Chem. 2002; 277: 15979-84
• Display abstract

• p58/ERGIC-53 is an animal calcium-dependent lectin that cycles between the endoplasmic reticulum (ER) and the Golgi complex and appears to act as a cargo receptor for a subset of soluble glycoproteins exported from the ER. We have determined the crystal structure of the carbohydrate recognition domain (CRD) of p58, the rat homologue of human ERGIC-53, to 1.46 A resolution. The fold and ligand binding site are most similar to those of leguminous lectins. The structure also resembles that of the CRD of the ER folding chaperone calnexin and the neurexins, a family of non-lectin proteins expressed on neurons. The CRD comprises one concave and one convex beta-sheet packed into a beta-sandwich. The ligand binding site resides in a negatively charged cleft formed by conserved residues. A large surface patch of conserved residues with a putative role in protein-protein interactions and oligomerization lies on the opposite side of the ligand binding site. Together with previous functional data, the structure defines a new and expanding class of calcium-dependent animal lectins and provides a starting point for the understanding of glycoprotein sorting between the ER and the Golgi.

• Sabathe F, Belaich A, Soucaille P
• Characterization of the cellulolytic complex (cellulosome) of Clostridium acetobutylicum.
• FEMS Microbiol Lett. 2002; 217: 15-22
• Display abstract

• A large cellulosomal gene cluster was identified in the recently sequenced genome of Clostridium acetobutylicum ATCC 824. Sequence analysis revealed that this cluster contains the genes for the scaffolding protein CipA, the processive endocellulase Cel48A, several endoglucanases of families 5 and 9, the mannanase Man5G, and a hydrophobic protein, OrfXp. Surprisingly, genetic organization of this large cluster is very similar to that of Clostridium cellulolyticum, the model of mesophilic clostridial cellulosomes. As C. acetobutylicum is unable to grow on cellulosic substrates, the existence of a cellulosomal gene cluster in the genome raises questions about its expression, function and evolution. Biochemical evidence for the expression of a cellulosomal protein complex was investigated. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal sequencing and Western blotting with antibodies against specific components of the C. cellulolyticum cellulosome suggest that at least four major cellulosomal proteins are present. In addition, despite the fact that no cellulolytic activities were detected, we report here the evidence for the production of a high molecular mass cellulosomal complex in C. acetobutylicum.

• Schaeffer F, Matuschek M, Guglielmi G, Miras I, Alzari PM, Beguin P
• Duplicated dockerin subdomains of Clostridium thermocellum endoglucanase CelD bind to a cohesin domain of the scaffolding protein CipA with distinct thermodynamic parameters and a negative cooperativity.
• Biochemistry. 2002; 41: 2106-14
• Display abstract

• Mutagenized dockerin domains of endoglucanase CelD (type I) and of the cellulosome-integrating protein CipA (type II) were constructed by swapping residues 10 and 11 of the first or the second duplicated segment between the two polypeptides. These residues have been proposed to determine the specificity of cohesin-dockerin interactions. The dockerin domain of CelD still bound to the seventh cohesin domain of CipA (CohCip7), provided that mutagenesis occurred in one segment only. Binding was no longer detected by nondenaturing gel electrophoresis when both segments were mutagenized. The dockerin domain of CipA bound to the cohesin domain of SdbA as long as the second segment was intact. None of the mutated dockerins displayed detectable binding to the noncognate cohesin domain. Isothermal titration calorimetry showed that binding of the CelD dockerin to CohCip7 occurred with a high affinity [K(a) = (2.6 +/- 0.5) x 10(9) M(-1)] and a 1:1 stoichiometry. The reaction was weakly exothermic (DeltaHdegrees = -2.22 +/- 0.2 kcal x mol(-1)) and largely entropy driven (TDeltaSdegrees = 10.70 +/- 0.5 kcal x mol(-1)). The heat capacity change on complexation was negative (DeltaC(p) = -305 +/- 15 cal x mol(-1) x K(-1)). These values show that cohesin-dockerin binding is mainly hydrophobic. Mutations in the first or the second dockerin segment reduced or enhanced, respectively, the hydrophobic character of the interaction. Due to partial enthalpy-entropy compensation, these mutations induced only small changes in binding affinity. However, the binding affinity was strongly decreased when both segments were mutated, indicating strong negative cooperativity between the two mutated sites.

• Murashima K, Kosugi A, Doi RH
• Synergistic effects on crystalline cellulose degradation between cellulosomal cellulases from Clostridium cellulovorans.
• J Bacteriol. 2002; 184: 5088-95
• Display abstract

• Clostridium cellulovorans produces a multienzyme cellulose-degrading complex called the cellulosome. In this study, we determined the synergistic effects on crystalline cellulose degradation by three different recombinant cellulosomes containing either endoglucanase EngE, endoglucanase EngH, or exoglucanase ExgS bound to mini-CbpA, a part of scaffolding protein CbpA. EngE, EngH, and ExgS are classified into the glycosyl hydrolase families 5, 9, and 48, respectively. The assembly of ExgS and EngH with mini-CbpA increased the activity against insoluble cellulose 1.5- to 3-fold, although no effects on activity against soluble cellulose were observed. These results indicated that mini-CbpA could help cellulase components degrade insoluble cellulose but not soluble cellulose. The mixture of the cellulosomes containing ExgS and EngH showed higher activity and synergy degrees than the other cellulosome mixtures, indicating the synergistic effect between EngH and ExgS was the most dominant effect among the three mixtures for crystalline cellulose degradation. Reactions were also performed by adding different cellulosomes in a sequential manner. When ExgS was used for the initial reaction followed by EngE and EngH, almost no synergistic effect was observed. On the other hand, when EngE or EngH was used for the first reaction followed by ExgS, synergistic effects were observed. These results indicated that the initial reactions by EngH and/or EngE promoted cellulose degradation by ExgS.

• Han S, Arvai AS, Clancy SB, Tainer JA
• Crystal structure and novel recognition motif of rho ADP-ribosylating C3 exoenzyme from Clostridium botulinum: structural insights for recognition specificity and catalysis.
• J Mol Biol. 2001; 305: 95-107
• Display abstract

• Clostridium botulinum C3 exoenzyme inactivates the small GTP-binding protein family Rho by ADP-ribosylating asparagine 41, which depolymerizes the actin cytoskeleton. C3 thus represents a major family of the bacterial toxins that transfer the ADP-ribose moiety of NAD to specific amino acids in acceptor proteins to modify key biological activities in eukaryotic cells, including protein synthesis, differentiation, transformation, and intracellular signaling. The 1.7 A resolution C3 exoenzyme structure establishes the conserved features of the core NAD-binding beta-sandwich fold with other ADP-ribosylating toxins despite little sequence conservation. Importantly, the central core of the C3 exoenzyme structure is distinguished by the absence of an active site loop observed in many other ADP-ribosylating toxins. Unlike the ADP-ribosylating toxins that possess the active site loop near the central core, the C3 exoenzyme replaces the active site loop with an alpha-helix, alpha3. Moreover, structural and sequence similarities with the catalytic domain of vegetative insecticidal protein 2 (VIP2), an actin ADP-ribosyltransferase, unexpectedly implicates two adjacent, protruding turns, which join beta5 and beta6 of the toxin core fold, as a novel recognition specificity motif for this newly defined toxin family. Turn 1 evidently positions the solvent-exposed, aromatic side-chain of Phe209 to interact with the hydrophobic region of Rho adjacent to its GTP-binding site. Turn 2 evidently both places the Gln212 side-chain for hydrogen bonding to recognize Rho Asn41 for nucleophilic attack on the anomeric carbon of NAD ribose and holds the key Glu214 catalytic side-chain in the adjacent catalytic pocket. This proposed bipartite ADP-ribosylating toxin turn-turn (ARTT) motif places the VIP2 and C3 toxin classes into a single ARTT family characterized by analogous target protein recognition via turn 1 aromatic and turn 2 hydrogen-bonding side-chain moieties. Turn 2 centrally anchors the catalytic Glu214 within the ARTT motif, and furthermore distinguishes the C3 toxin class by a conserved turn 2 Gln and the VIP2 binary toxin class by a conserved turn 2 Glu for appropriate target side-chain hydrogen-bonding recognition. Taken together, these structural results provide a molecular basis for understanding the coupled activity and recognition specificity for C3 and for the newly defined ARTT toxin family, which acts in the depolymerization of the actin cytoskeleton. This beta5 to beta6 region of the toxin fold represents an experimentally testable and potentially general recognition motif region for other ADP-ribosylating toxins that have a similar beta-structure framework.

• Fierobe HP et al.
• Design and production of active cellulosome chimeras. Selective incorporation of dockerin-containing enzymes into defined functional complexes.
• J Biol Chem. 2001; 276: 21257-61
• Display abstract

• Defined chimeric cellulosomes were produced in which selected enzymes were incorporated in specific locations within a multicomponent complex. The molecular building blocks of this approach are based on complementary protein modules from the cellulosomes of two clostridia, Clostridium thermocellum and Clostridium cellulolyticum, wherein cellulolytic enzymes are incorporated into the complexes by means of high-affinity species-specific cohesin-dockerin interactions. To construct the desired complexes, a series of chimeric scaffoldins was prepared by recombinant means. The scaffoldin chimeras were designed to include two cohesin modules from the different species, optionally connected to a cellulose-binding domain. The two divergent cohesins exhibited distinct specificities such that each recognized selectively and bound strongly to its dockerin counterpart. Using this strategy, appropriate dockerin-containing enzymes could be assembled precisely and by design into a desired complex. Compared with the mixture of free cellulases, the resultant cellulosome chimeras exhibited enhanced synergistic action on crystalline cellulose.

• Schwarz G, Schrader N, Mendel RR, Hecht HJ, Schindelin H
• Crystal structures of human gephyrin and plant Cnx1 G domains: comparative analysis and functional implications.
• J Mol Biol. 2001; 312: 405-18
• Display abstract

• The molybdenum cofactor (Moco) consists of a unique and conserved pterin derivative, usually referred to as molybdopterin (MPT), which coordinates the essential transition metal molybdenum (Mo). Moco is required for the enzymatic activities of all Mo-enzymes, with the exception of nitrogenase and is synthesized by an evolutionary old multi-step pathway that is dependent on the activities of at least six gene products. In eukaryotes, the final step of Moco biosynthesis, i.e. transfer and insertion of Mo into MPT, is catalyzed by the two-domain proteins Cnx1 in plants and gephyrin in mammals. Gephyrin is ubiquitously expressed, and was initially found in the central nervous system, where it is essential for clustering of inhibitory neuroreceptors in the postsynaptic membrane. Gephyrin and Cnx1 contain at least two functional domains (E and G) that are homologous to the Escherichia coli proteins MoeA and MogA, the atomic structures of which have been solved recently. Here, we present the crystal structures of the N-terminal human gephyrin G domain (Geph-G) and the C-terminal Arabidopsis thaliana Cnx1 G domain (Cnx1-G) at 1.7 and 2.6 A resolution, respectively. These structures are highly similar and compared to MogA reveal four major differences in their three-dimensional structures: (1) In Geph-G and Cnx1-G an additional alpha-helix is present between the first beta-strand and alpha-helix of MogA. (2) The loop between alpha 2 and beta 2 undergoes conformational changes in all three structures. (3) A beta-hairpin loop found in MogA is absent from Geph-G and Cnx1-G. (4) The C terminus of Geph-G follows a different path from that in MogA. Based on the structures of the eukaryotic proteins and their comparisons with E. coli MogA, the predicted binding site for MPT has been further refined. In addition, the characterized alternative splice variants of gephyrin are analyzed in the context of the three-dimensional structure of Geph-G.

• Notenboom V, Boraston AB, Kilburn DG, Rose DR
• Crystal structures of the family 9 carbohydrate-binding module from Thermotoga maritima xylanase 10A in native and ligand-bound forms.
• Biochemistry. 2001; 40: 6248-56
• Display abstract

• The C-terminal module of the thermostable Thermotoga maritima xylanase 10A (CBM9-2) is a family 9 carbohydrate-binding module that binds to amorphous and crystalline cellulose and a range of soluble di- and monosaccharides as well as to cello and xylo oligomers of different degrees of polymerization [Boraston, A. B., Creagh, A. L., Alam, Md. M., Kormos, J. M., Tomme, P., Haynes, C. A., Warren, R. A. J., and Kilburn, D. G. (2001) Biochemistry 40, 6240-6247]. The crystal structure of CBM9-2 has been determined by the multiwavelength anomalous dispersion method to 1.9 A resolution. CBM9-2 assumes a beta-sandwich fold and contains three metal binding sites. The bound metal atoms, which are most likely calcium cations, are in an octahedral coordination. The crystal structures of CBM9-2 in complex with glucose and cellobiose were also determined in order to identify the sugar-binding site and provide insight into the structural basis for sugar binding by CBM9-2. The sugar-binding site is a solvent-exposed slot sufficient in depth, width, and length to accommodate a disaccharide. Two tryptophan residues are stacked together on the surface of the protein forming the sugar-binding site. From the complex structures with glucose and cellobiose, it was inferred that CBM9-2 binds exclusively to the reducing end of mono-, di-, and oligosaccharides with an intricate hydrogen-bonding network involving mainly charged residues, as well as stacking interactions by Trp175 and Trp71. The binding interactions are limited to disaccharides as was expected from calorimetric data. Comparison of the glucose and cellobiose complexes revealed surprising differences in binding of these two substrates by CBM9-2. Cellobiose was found to bind in a distinct orientation from glucose, while still maintaining optimal stacking and electrostatic interactions with the reducing end sugar.

• Ikegami T, Okada T, Hashimoto M, Seino S, Watanabe T, Shirakawa M
• Solution structure of the chitin-binding domain of Bacillus circulans WL-12 chitinase A1.
• J Biol Chem. 2000; 275: 13654-61
• Display abstract

• The three-dimensional structure of the chitin-binding domain (ChBD) of chitinase A1 (ChiA1) from a Gram-positive bacterium, Bacillus circulans WL-12, was determined by means of multidimensional heteronuclear NMR methods. ChiA1 is a glycosidase that hydrolyzes chitin and is composed of an N-terminal catalytic domain, two fibronectin type III-like domains, and C-terminal ChBD(ChiA1) (45 residues, Ala(655)-Gln(699)), which binds specifically to insoluble chitin. ChBD(ChiA1) has a compact and globular structure with the topology of a twisted beta-sandwich. This domain contains two antiparallel beta-sheets, one composed of three strands and the other of two strands. The core region formed by the hydrophobic and aromatic residues makes the overall structure rigid and compact. The overall topology of ChBD(ChiA1) is similar to that of the cellulose-binding domain (CBD) of Erwinia chrysanthemi endoglucanase Z (CBD(EGZ)). However, ChBD(ChiA1) lacks the three aromatic residues aligned linearly and exposed to the solvent, which probably interact with cellulose in CBDs. Therefore, the binding mechanism of a group of ChBDs including ChBD(ChiA1) may be different from that proposed for CBDs.

• Ponpium P, Ratanakhanokchai K, Kyu KL
• Isolation and properties of a cellulosome-type multienzyme complex of the thermophilic Bacteroides sp. strain P-1.
• Enzyme Microb Technol. 2000; 26: 459-465
• Display abstract

• The extracellular form of cellulosome-type multienzyme complex of thermophilic Bacteroides sp. strain P-1 which was isolated from the anaerobic digester, is described. Multienzyme complex was isolated from the culture supernatant by an adsorption-desorption affinity chromatography on microcrystalline cellulose. The isolated multienzyme complex was found to form a complex that exhibited a high molecular weight (estimated at more than 1400 kDa) and was quite stable, requiring strong denaturing condition for dissociation. Polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulphate resolved multienzyme complex into at least 12 subunits with the molecular weight range of 49 to 209 kDa, respectively. The isolated multienzyme complex showed cellulose-binding ability, cellulase and xylanase activities and effected the hydrolysis of crystalline cellulose and lignocellulosic materials in the form of corncob, corn hull, rice straw, and sugarcane bagasse.

• Chaudhuri BN, Ko J, Park C, Jones TA, Mowbray SL
• Structure of D-allose binding protein from Escherichia coli bound to D-allose at 1.8 A resolution.
• J Mol Biol. 1999; 286: 1519-31
• Display abstract

• ABC transport systems for import or export of nutrients and other substances across the cell membrane are widely distributed in nature. In most bacterial systems, a periplasmic component is the primary determinant of specificity of the transport complex as a whole. We report here the crystal structure of the periplasmic binding protein for the allose system (ALBP) from Escherichia coli, solved at 1.8 A resolution using the molecular replacement method. As in the other members of the family (especially the ribose binding protein, RBP, with which it shares 35 % sequence homology), this structure consists of two similar domains joined by a three-stranded hinge region. The protein is believed to exist in a dynamic equilibrium of closed and open conformations in solution which is an important part of its function. In the closed ligand-bound form observed here, D-allose is buried at the domain interface. Only the beta-anomer of allopyranose is seen in the crystal structure, although the alpha-anomer can potentially bind with a similar affinity. Details of the ligand-binding cleft reveal the features that determine substrate specificity. Extensive hydrogen bonding as well as hydrophobic interactions are found to be important. Altogether ten residues from both the domains form 14 hydrogen bonds with the sugar. In addition, three aromatic rings, one from each domain with faces parallel to the plane of the sugar ring and a third perpendicular, make up a hydrophobic stacking surface for the ring hydrogen atoms. Our results indicate that the aromatic rings forming the sugar binding cleft can sterically block the binding of any hexose epimer except D-allose, 6-deoxy-allose or 3-deoxy-glucose; the latter two are expected to bind with reduced affinity, due to the loss of some hydrogen bonds. The pyranose form of the pentose, D-ribose, can also fit into the ALBP binding cleft, although with lower binding affinity. Thus, ALBP can function as a low affinity transporter for D-ribose. The significance of these results is discussed in the context of the function of allose and ribose transport systems.

• van Asselt EJ, Dijkstra AJ, Kalk KH, Takacs B, Keck W, Dijkstra BW
• Crystal structure of Escherichia coli lytic transglycosylase Slt35 reveals a lysozyme-like catalytic domain with an EF-hand.
• Structure. 1999; 7: 1167-80
• Display abstract

• BACKGROUND: Lytic transglycosylases are bacterial muramidases that catalyse the cleavage of the beta- 1,4-glycosidic bond between N-acetylmuramic acid (MurNAc) and N-acetylglucosamine (GlcNAc) in peptidoglycan with concomitant formation of a 1,6-anhydrobond in the MurNAc residue. These muramidases play an important role in the metabolism of the bacterial cell wall and might therefore be potential targets for the rational design of antibacterial drugs. One of the lytic transglycosylases is Slt35, a naturally occurring soluble fragment of the outer membrane bound lytic transglycosylase B (MltB) from Escherichia coli. RESULTS: The crystal structure of Slt35 has been determined at 1.7 A resolution. The structure reveals an ellipsoid molecule with three domains called the alpha, beta and core domains. The core domain is sandwiched between the alpha and beta domains. Its fold resembles that of lysozyme, but it contains a single metal ion binding site in a helix-loop-helix module that is surprisingly similar to the eukaryotic EF-hand calcium-binding fold. Interestingly, the Slt35 EF-hand loop consists of 15 residues instead of the usual 12 residues. The only other prokaryotic proteins with an EF-hand motif identified so far are the D-galactose-binding proteins. Residues from the alpha and core domains form a deep groove where the substrate fragment GlcNAc can be bound. CONCLUSIONS: The three-domain structure of Slt35 is completely different from the Slt70 structure, the only other lytic transglycosylase of known structure. Nevertheless, the core domain of Slt35 closely resembles the fold of the catalytic domain of Slt70, despite the absence of any obvious sequence similarity. Residue Glu162 of Slt35 is in an equivalent position to Glu478, the catalytic acid/base of Slt70. GlcNAc binds close to Glu162 in the deep groove. Moreover, mutation of Glu162 into a glutamine residue yielded a completely inactive enzyme. These observations indicate the location of the active site and strongly support a catalytic role for Glu162.

• Declerck N, Vincent F, Hoh F, Aymerich S, van Tilbeurgh H
• RNA recognition by transcriptional antiterminators of the BglG/SacY family: functional and structural comparison of the CAT domain from SacY and LicT.
• J Mol Biol. 1999; 294: 389-402
• Display abstract

• Transcriptional antiterminators of the BglG/SacY family are regulatory proteins that mediate the induction of sugar metabolizing operons in Gram-positive and Gram-negative bacteria. Upon activation, these proteins bind to specific targets in nascent mRNAs, thereby preventing abortive dissociation of the RNA polymerase from the DNA template. We have previously characterized the RNA-binding domain of SacY from Bacillus subtilis and determined its three-dimensional structure by both NMR and crystallography. In the present study, we have characterized the paralogous domain from LicT and we present the first structural comparison between two BglG/SacY family members. Similar to SacY, the RNA-binding activity of LicT is contained within the 56 N-terminal amino acid residue fragment corresponding to the so-called co-antiterminator (CAT) domain. Surface plasmon resonance affinity measurements show that, compared to SacY-CAT, LicT-CAT binds more tightly and more specifically to its cognate RNA target, with a KD value of about 10(-8) M. The crystal structure of LicT-CAT has been determined at 1.8 A resolution and compared to that of SacY-CAT. Both molecules fold as symmetrical dimers, each monomer comprising a four-stranded antiparallel beta-sheet that stacks against the beta-sheet of the other monomer in a very conserved manner. Comparison of the proposed RNA-binding surfaces shows that many of the conserved atoms concentrate in a central region across one face of the CAT dimer, whereas variable elements are mostly found at the edges. Interestingly, the electrostatic potential maps calculated for the two molecules are quite different, except for the core of the RNA-binding site, which appears essentially neutral in both structures.

• Ko TP, Liao CC, Ku WY, Chak KF, Yuan HS
• The crystal structure of the DNase domain of colicin E7 in complex with its inhibitor Im7 protein.
• Structure. 1999; 7: 91-102
• Display abstract

• BACKGROUND: Colicin E7 (ColE7) is one of the bacterial toxins classified as a DNase-type E-group colicin. The cytotoxic activity of a colicin in a colicin-producing cell can be counteracted by binding of the colicin to a highly specific immunity protein. This biological event is a good model system for the investigation of protein recognition. RESULTS: The crystal structure of a one-to-one complex between the DNase domain of colicin E7 and its cognate immunity protein Im7 has been determined at 2.3 A resolution. Im7 in the complex is a varied four-helix bundle that is identical to the structure previously determined for uncomplexed Im7. The structure of the DNase domain of ColE7 displays a novel alpha/beta fold and contains a Zn2+ ion bound to three histidine residues and one water molecule in a distorted tetrahedron geometry. Im7 has a V-shaped structure, extending two arms to clamp the DNase domain of ColE7. One arm (alpha1(*)-loop12-alpha2(*); where * represents helices in Im7) is located in the region that displays the greatest sequence variation among members of the immunity proteins in the same subfamily. This arm mainly uses acidic sidechains to interact with the basic sidechains in the DNase domain of ColE7. The other arm (loop 23-alpha3(*)-loop 34) is more conserved and it interacts not only with the sidechain but also with the mainchain atoms of the DNase domain of ColE7. CONCLUSIONS: The protein interfaces between the DNase domain of ColE7 and Im7 are charge-complementary and charge interactions contribute significantly to the tight and specific binding between the two proteins. The more variable arm in Im7 dominates the binding specificity of the immunity protein to its cognate colicin. Biological and structural data suggest that the DNase active site for ColE7 is probably near the metal-binding site.

• Hayashi H et al.
• Nucleotide sequences of two contiguous and highly homologous xylanase genes xynA and xynB and characterization of XynA from Clostridium thermocellum.
• Appl Microbiol Biotechnol. 1999; 51: 348-57
• Display abstract

• A 5.7-kbp region of the Clostridium thermocellum F1 DNA was sequenced and found to contain two contiguous and highly homologous xylanase genes, xynA and xynB. The xynA gene encoding the xylanase XynA consists of 2049 bp and encodes a protein of 683 amino acids with a molecular mass of 74,511 Da, and the xynB gene encoding the xylanase XynB consists of 1371 bp and encodes a protein of 457 amino acids with a molecular mass of 49,883 Da. XynA is a modular enzyme composed of a typical N-terminal signal peptide and four domains in the following order: a family-II xylanase domain, a family-VI cellulose-binding domain, a dockerin domain, and a NodB domain. XynB exhibited extremely high overall sequence homology with XynA (identity 96.9%), while lacking the NodB domain present in the latter. These facts suggested that the xynA and xynB genes originated from a common ancestral gene through gene duplication. XynA was purified from a recombinant Escherichia coli strain and characterized. The purified enzyme was highly active toward xylan; the specific activity on oat-spelt xylan was 689 units/mg protein. Immunological and zymogram analyses suggested that XynA and XynB are components of the C. thermocellum F1 cellulosome.

• Lytle B, Wu JH
• Involvement of both dockerin subdomains in assembly of the Clostridium thermocellum cellulosome.
• J Bacteriol. 1998; 180: 6581-5
• Display abstract

• Clostridium thermocellum produces an extracellular cellulase complex termed the cellulosome. It consists of a scaffolding protein, CipA, containing nine cohesin domains and a cellulose-binding domain, and at least 14 different enzymatic subunits, each containing a conserved duplicated sequence, or dockerin domain. The cohesin-dockerin interaction is responsible for the assembly of the catalytic subunits into the cellulosome structure. Each duplicated sequence of the dockerin domain contains a region bearing homology to the EF-hand calcium-binding motif. Two subdomains, each containing a putative calcium-binding motif, were constructed from the dockerin domain of CelS, a major cellulosomal catalytic subunit. These subdomains, called DS1 and DS2, were cloned by PCR and expressed in Escherichia coli. The binding of DS1 and DS2 to R3, the third cohesin domain of CipA, was analyzed by nondenaturing gel electrophoresis. A stable complex was formed only when R3 was combined with both DS1 and DS2, indicating that the two halves of the dockerin domain interact with each other and such interaction is required for effective binding of the dockerin domain to the cohesin domain.

• Zverlov VV, Velikodvorskaya GV, Schwarz WH, Bronnenmeier K, Kellermann J, Staudenbauer WL
• Multidomain structure and cellulosomal localization of the Clostridium thermocellum cellobiohydrolase CbhA.
• J Bacteriol. 1998; 180: 3091-9
• Display abstract

• The nucleotide sequence of the Clostridium thermocellum F7 cbhA gene, coding for the cellobiohydrolase CbhA, has been determined. An open reading frame encoding a protein of 1,230 amino acids was identified. Removal of a putative signal peptide yields a mature protein of 1,203 amino acids with a molecular weight of 135,139. Sequence analysis of CbhA reveals a multidomain structure of unusual complexity consisting of an N-terminal cellulose binding domain (CBD) homologous to CBD family IV, an immunoglobulin-like beta-barrel domain, a catalytic domain homologous to cellulase family E1, a duplicated domain similar to fibronectin type III (Fn3) modules, a CBD homologous to family III, a highly acidic linker region, and a C-terminal dockerin domain. The cellulosomal localization of CbhA was confirmed by Western blot analysis employing polyclonal antibodies raised against a truncated enzymatically active version of CbhA. CbhA was identified as cellulosomal subunit S3 by partial amino acid sequence analysis. Comparison of the multidomain structures indicates striking similarities between CbhA and a group of cellulases from actinomycetes. Average linkage cluster analysis suggests a coevolution of the N-terminal CBD and the catalytic domain and its spread by horizontal gene transfer among gram-positive cellulolytic bacteria.

• Walter S, Wellmann E, Schrempf H
• The cell wall-anchored Streptomyces reticuli avicel-binding protein (AbpS) and its gene.
• J Bacteriol. 1998; 180: 1647-54
• Display abstract

• Streptomyces reticuli produces a 35-kDa cellulose-binding protein (AbpS) which interacts strongly with crystalline forms of cellulose (Avicel, bacterial microcrystalline cellulose, and tunicin cellulose); other polysaccharides are recognized on weakly (chitin and Valonia cellulose) or not at all (xylan, starch, and agar). The protein could be purified to homogeneity due to its affinity to Avicel. After we sequenced internal peptides, the corresponding gene was identified by reverse genetics. In vivo labelling experiments with fluorescein isothiocyanate (FITC), FITC-labelled secondary antibodies, or proteinase K treatment revealed that the anchored AbpS protrudes from the surfaces of the hyphae. When we investigated the hydrophobicity of the deduced AbpS, one putative transmembrane segment was predicted at the C terminus. By analysis of the secondary structure, a large centrally located alpha-helix which has weak homology to the tropomyosin protein family was found. Physiological studies showed that AbpS is synthesized during the late logarithmic phase, independently of the carbon source.

• Mattinen ML, Linder M, Drakenberg T, Annila A
• Solution structure of the cellulose-binding domain of endoglucanase I from Trichoderma reesei and its interaction with cello-oligosaccharides.
• Eur J Biochem. 1998; 256: 279-86
• Display abstract

• The solution structure of a synthetic 38-residue cellulose-binding domain (CBD) of endoglucanase I from Trichoderma reesei (CBD(EGI)) was determined by two-dimensional 1H-NMR spectroscopy. 100 structures were generated from a total of 599 NOE derived distance restraints and 28 phi and 14 chi dihedral angle restraints. For the final set of 19 selected structures, the rms deviation about the mean structure was 0.83+/-0.26 A for all atoms and 0.50+/-0.22 A for the backbone atoms. The structure of CBD(EGI) was very similar to that of CBD of cellobiohydrolase I from T reesei (CBD(CBHI)). The backbone trace of CBD(EGI) followed closely the irregular triple-stranded antiparallel beta-sheet structure of CBD(CBHI). Moreover, apart from the different side chains of Trp7 (CBD(EGI)) and Tyr5 (CBD(CBHI)), the cellulose-binding face of CBD(EGI) was similar to that of CBD(CBHI) within the precision of the structures. Finally, the interaction between CBD(EGI) and soluble sugars was investigated using cellopentaose and cellohexaose as substrates. Experiments showed that the interactions between CBD(EGI) and cellobiose units of sugars are specific, supporting the previously presented model for the CBD binding to crystalline cellulose.

• Gal L, Gaudin C, Belaich A, Pages S, Tardif C, Belaich JP
• CelG from Clostridium cellulolyticum: a multidomain endoglucanase acting efficiently on crystalline cellulose.
• J Bacteriol. 1997; 179: 6595-601
• Display abstract

• The gene coding for CelG, a family 9 cellulase from Clostridium cellulolyticum, was cloned and overexpressed in Escherichia coli. Four different forms of the protein were genetically engineered, purified, and studied: CelGL (the entire form of CelG), CelGcat1 (the catalytic domain of CelG alone), CelGcat2 (CelGcat1 plus 91 amino acids at the beginning of the cellulose binding domain [CBD]), and GST-CBD(CelG) (the CBD of CelG fused to glutathione S-transferase). The biochemical properties of CelG were compared with those of CelA, an endoglucanase from C. cellulolyticum which was previously studied. CelG, like CelA, was found to have an endo cutting mode of activity on carboxymethyl cellulose (CMC) but exhibited greater activity on crystalline substrates (bacterial microcrystalline cellulose and Avicel) than CelA. As observed with CelA, the presence of the nonhydrolytic miniscaffolding protein (miniCipC1) enhanced the activity of CelG on phosphoric acid swollen cellulose (PASC), but to a lesser extent. The absence of the CBD led to the complete inactivation of the enzyme. The abilities of CelG and GST-CBD(CelG) to bind various substrates were also studied. Although the entire enzyme is able to bind to crystalline cellulose at a limited number of sites, the chimeric protein GST-CBD(CelG) does not bind to either of the tested substrates (Avicel and PASC). The lack of independence between the two domains and the weak binding to cellulose suggest that this CBD-like domain may play a special role and be either directly or indirectly involved in the catalytic reaction.

• Pages S et al.
• Species-specificity of the cohesin-dockerin interaction between Clostridium thermocellum and Clostridium cellulolyticum: prediction of specificity determinants of the dockerin domain.
• Proteins. 1997; 29: 517-27
• Display abstract

• The cross-species specificity of the cohesin-dockerin interaction, which defines the incorporation of the enzymatic subunits into the cellulosome complex, has been investigated. Cohesin-containing segments from the cellulosomes of two different species, Clostridium thermocellum and Clostridium cellulolyticum, were allowed to interact with cellulosomal (dockerin-containing) enzymes from each species. In both cases, the cohesin domain of one bacterium interacted with enzymes from its own cellulosome in a calcium-dependent manner, but the same cohesin failed to recognize enzymes from the other species. Thus, in the case of these two bacteria, the cohesin-dockerin interaction seems to be species-specific. Based on intra- and cross-species sequence comparisons among the different dockerins together with their known specificities, we tender a prediction as to the amino-acid residues critical to recognition of the cohesins. The suspected residues were narrowed down to only four, which comprise a repeated pair located within the calcium-binding motif of two duplicated sequences, characteristic of the dockerin domain. According to the proposed model, these four residues do not participate in the binding of calcium per se; instead, they appear to serve as recognition codes in promoting interaction with the cohesin surface.

• Leibovitz E, Ohayon H, Gounon P, Beguin P
• Characterization and subcellular localization of the Clostridium thermocellum scaffoldin dockerin binding protein SdbA.
• J Bacteriol. 1997; 179: 2519-23
• Display abstract

• This article reports the characterization of the Clostridium thermocellum SdbA protein thought to anchor the cellulosome to the bacterial cell surface. The NH2-terminal region of SdbA consists of a cohesin domain which specifically binds the dockerin domain of the cellulosomal scaffolding protein CipA. The COOH-terminal region consists of a triplicated segment, termed SLH repeats, which is present in the sequence of many bacterial cell surface polypeptides. The binding parameters of the interaction between the dockerin domain of CipA and the cohesin domain of SdbA were studied by using, as a probe, the chimeric polypeptide CelC-DSCipA, which carries the dockerin domain of CipA fused to endoglucanase CelC. In the presence of Ca2+, CelC-DSCipA bound to SdbA with an affinity constant of 1.26 x 10(7) M(-1). Binding of CelC-DSCipA to SdbA as a function of Ca2+ concentration was sigmoidal, corresponding to a Hill coefficient of 2 and an affinity constant for Ca2+ of 4 x 10(6) M(-2). This suggested the presence of two cooperatively bound Ca2+ ions in the cohesin-dockerin complex. Immunoblotting of C. thermocellum subcellular fractions and electron microscopy of immunocytochemically labeled cells indicated that SdbA is located on the cell surface and is a component of the cellulosome. Together, the data confirm that SdbA could mediate anchoring of the cellulosome to the surface of C. thermocellum cells by interacting with the dockerin domain of CipA.

• Brun E, Moriaud F, Gans P, Blackledge MJ, Barras F, Marion D
• Solution structure of the cellulose-binding domain of the endoglucanase Z secreted by Erwinia chrysanthemi.
• Biochemistry. 1997; 36: 16074-86
• Display abstract

• Two-dimensional proton nuclear magnetic resonance spectroscopy has been used to determine the three-dimensional structure of the 62 amino acid C-terminal cellulose-binding domain (CBD) of the endoglucanase Z (CBDEGZ), secreted by Erwinia chrysanthemi. An experimental data set comprising 958 interproton nOe-derived restraints was used to calculate 23 structures. The calculated structures have an average root-mean-square deviation between Cys4 and Cys61 of 0.91 +/- 0.11 A for backbone atoms and 1.18 +/- 0.12 A for the heavy atoms. The CBDEGZ exhibits a skiboot shape based mainly on a triple antiparallel beta-sheet perpendicular to a less-ordered summital loop. Three aromatic rings (Trp18, Trp43, and Tyr44) are localized on one face of the protein and are exposed to the solvent in a conformation compatible with a cellulose-binding site. Based on its original folding, we have been able to relate the CBD sequence to those of several domains of unknown function occurring in several bacterial chitinases as well as other proteins. This study also provides a structural basis for analyzing the secretion-related information specific to the CBDEGZ.

• Johnson PE, Tomme P, Joshi MD, McIntosh LP
• Interaction of soluble cellooligosaccharides with the N-terminal cellulose-binding domain of Cellulomonas fimi CenC 2. NMR and ultraviolet absorption spectroscopy.
• Biochemistry. 1996; 35: 13895-906
• Display abstract

• The N-terminal cellulose-binding domain (CBDN1) from Cellulomonas fimi beta-1,4-glucanase CenC binds amorphous but not crystalline cellulose. To investigate the structural and thermodynamic bases of cellulose binding, NMR and difference ultraviolet absorbance spectroscopy were used in parallel with calorimetry (Tomme, P., Creagh, A. L., Kilburn, D. G., & Haynes, C. A., (1996) Biochemistry 35, 13885-13894) to characterize the interaction of soluble cellooligosaccharides with CBDN1. Association constants, determined from the dependence of the amide 1H and 15N chemical shifts of CBDN1 upon added sugar, increase from 180 +/- 60 M-1 for cellotriose to 4,200 +/- 720 M-1 for cellotetraose, 34,000 +/- 7,600 M-1 for cellopentaose, and an estimate of 50,000 M-1 for cellohexaose. This implies that the CBDN1 cellulose-binding site spans approximately five glucosyl units. On the basis of the observed patterns of amide chemical shift changes, the cellooligosaccharides bind along a five-stranded beta-sheet that forms a concave face of the jelly-roll beta-sandwich structure of CBDN1. This beta-sheet contains a strip of hydrophobic side chains flanked on both sides by polar residues. NMR and difference ultraviolet absorbance measurements also demonstrate that tyrosine, but not tryptophan, side chains may be involved in oligosaccharide binding. These results lead to a model in which CBDN1 interacts with soluble cellooligosaccharides and, by inference, with single polysaccharide chains in regions of amorphous cellulose, primarily through hydrogen bonding to the equatorial hydroxyl groups of the pyranose rings. Van der Waals stacking of the sugar rings against the apolar side chains may augment binding. CBDN1 stands in marked contrast to previously characterized CBDs that absorb to crystalline cellulose via a flat binding surface dominated by exposed aromatic rings.

• Ahsan MM, Kimura T, Karita S, Sakka K, Ohmiya K
• Cloning, DNA sequencing, and expression of the gene encoding Clostridium thermocellum cellulase CelJ, the largest catalytic component of the cellulosome.
• J Bacteriol. 1996; 178: 5732-40
• Display abstract

• The Clostridium thermocellum F1 celJ gene, encoding endoglucanase J (CelJ), consists of an open reading frame (ORF) of 4,803 nucleotides and encodes a protein of 1,601 amino acids with a molecular weight of 178,055. The ORF was confirmed as celJ by comparison with the N-terminal sequence of a truncated CelJ derivative. CelJ is a modular enzyme composed of N-terminal signal peptide and six domains in the following order: an S-layer homology domain, a domain of unknown function (UD-1), a subfamily E1 endoglucanase domain, a family J endoglucanase domain, a docking domain, and another domain of unknown function (UD-2). UD-1 has no significant similarity to UD-2. CelJ hydrolyzed carboxymethylcellulose and xylan, and xylanase activity was ascribed to the family J domain. Antiserum raised against the truncated CelJ cross-reacted with proteins contained in the cellulosome of C. thermocellum F1. These results strongly suggest that CelJ is equivalent to S2, which was identified as the largest catalytic component in the cellulosome of C. thermocellum YS. A second but incomplete ORF encoding an enzyme classified in subfamily E2 endoglucanase, was located downstream of celJ.

• Sakon J, Adney WS, Himmel ME, Thomas SR, Karplus PA
• Crystal structure of thermostable family 5 endocellulase E1 from Acidothermus cellulolyticus in complex with cellotetraose.
• Biochemistry. 1996; 35: 10648-60
• Display abstract

• The crystal structure of the catalytic domain of the thermostable endocellulase E1 from Acidothermus cellulolyticus in complex with cellotetraose has been solved by multiple isomorphous replacement and refined at 2.4 A resolution to an R-factor of 0.18 (Rfree = 0.24). E1cd is a member of the 4/7 superfamily of hydrolases, and as expected, its structure is an (alpha/beta)8 barrel, which constitutes a prototype for family 5-subfamily 1 cellulases. The cellotetraose molecule binds in a manner consistent with the expected Michaelis complex for the glycosylation half-reaction and reveals that all eight residues conserved in family 5 enzymes are involved in recognition of the glycosyl group attacked during cleavage. Whereas only three residues are conserved in the whole 4/7 superfamily (the Asn/Glu duo and the Glu from which the name is derived), structural comparisons show that all eight residues conserved in family 5 have functional equivalents in the other 4/7 superfamily members, strengthening the case that mechanistic details are conserved throughout the superfamily. On the basis of the structure, a detailed sequence of physical steps of the cleavage mechanism is proposed. A close approach of two key glutamate residues provides an elegant mechanism for the shift in the pKa of the acid/base for the glycosylation and deglycosylation half-reactions. Finally, purely structural based comparisons are used to show that significant differences exist in structural similarity scores resulting from different methods and suggest that caution should be exercised in interpreting such results in terms of implied evolutional relationships.

• Reinikainen T, Teleman O, Teeri TT
• Effects of pH and high ionic strength on the adsorption and activity of native and mutated cellobiohydrolase I from Trichoderma reesei.
• Proteins. 1995; 22: 392-403
• Display abstract

• Cellobiohydrolase I (CBHI) is the major cellulase of Trichoderma reesei. The enzyme contains a discrete cellulose-binding domain (CBD), which increases its binding and activity on crystalline cellulose. We studied cellulase-cellulose interactions using site-directed mutagenesis on the basis of the three-dimensional structure of the CBD of CBHI. Three mutant proteins which have earlier been produced in Saccharomyces cerevisiae were expressed in the native host organism. The data presented here support the hypothesis that a conserved tyrosine (Y492) located on the flat and more hydrophilic surface of the CBD is essential for the functionality. The data also suggest that the more hydrophobic surface is not directly involved in the CBD function. The pH dependence of the adsorption revealed that electrostatic repulsion between the bound proteins may also control the adsorption. The binding of CBHI to cellulose was significantly affected by high ionic strength suggesting that the interaction with cellulose includes a hydrophobic effect. High ionic strength increased the activity of the isolated core and of mutant proteins on crystalline cellulose, indicating that once productively bound, the enzymes are capable of solubilizing cellulose even with a mutagenized or with no CBD.

• Morag E et al.
• Expression, purification, and characterization of the cellulose-binding domain of the scaffoldin subunit from the cellulosome of Clostridium thermocellum.
• Appl Environ Microbiol. 1995; 61: 1980-6
• Display abstract

• The major cellulose-binding domain (CBD) from the cellulosome of Clostridium thermocellum YS was cloned and overexpressed in Escherichia coli. The expressed protein was purified efficiently by a modification of a novel procedure termed affinity digestion. The properties of the purified polypeptide were compared with those of a related CBD derived from a cellulosome-like complex of a similar (but mesophilic) clostridial species, Clostridium cellulovorans. The binding properties of the two proteins with their common substrate were found to be very similar. Despite the similarity in the amino acid sequences of the two CBDs, polyclonal antibodies raised against the CBD from C. thermocellum failed to interact with the protein from C. cellulovorans. Chemical modification of the single cysteine of the CBD had little effect on the binding to cellulose. Biotinylation of this cysteine allowed the efficient binding of avidin to cellulose, and the resultant matrix is appropriate for use as a universal affinity system.

• Millward-Sadler SJ, Poole DM, Henrissat B, Hazlewood GP, Clarke JH, Gilbert HJ
• Evidence for a general role for high-affinity non-catalytic cellulose binding domains in microbial plant cell wall hydrolases.
• Mol Microbiol. 1994; 11: 375-82
• Display abstract

• Cellulases expressed by Cellulomonas fimi consist of a catalytic domain and a discrete non-catalytic cellulose-binding domain (CBD). To establish whether CBDs are common features of plant cell-wall hydrolases from C. fimi, the molecular architecture of xylanase D (XYLD) from this bacterium was investigated. The gene encoding XYLD, designated xynD, consisted of an open reading frame of 1936 bp encoding a protein of M(r) 68,000. The deduced primary sequence of XYLD was confirmed by the size (64 kDa) and N-terminal sequence of the purified recombinant xylanase. Biochemical analysis of the purified enzyme revealed that XYLD is an endoacting xylanase which displays no detectable activity against polysaccharides other than xylan. The predicted primary structure of XYLD comprised an N-terminal signal peptide followed by a 190-residue domain that exhibited significant homology to Family-G xylanases. Truncated derivatives of xynD, encoding the N-terminal 193 amino acids of mature XYLD directed the synthesis of a functional xylanase, confirming that the 190-residue N-terminal sequence constitutes the catalytic domain. The remainder of the enzyme consisted of two approximately 90-residue domains, which exhibited extensive homology with each other, and limited sequence identity with CBDs from other polysaccharide hydrolases. Between the two putative CBDs is a 197-amino-acid sequence that exhibits substantial homology with Rhizobium NodB proteins. The four discrete domains in XYLD were separated by either threonine/proline-or novel glycine-rich linker regions. Although full-length XYLD adsorbed to cellulose, truncated derivatives of the enzyme lacking the C-terminal CBD hydrolysed xylan but did not bind to cellulose.(ABSTRACT TRUNCATED AT 250 WORDS)

• Goldstein MA, Doi RH
• Mutation analysis of the cellulose-binding domain of the Clostridium cellulovorans cellulose-binding protein A.
• J Bacteriol. 1994; 176: 7328-34
• Display abstract

• Cellulose-binding protein A (CbpA) has been previously shown to mediate the interaction between crystalline cellulose substrates and the cellulase enzyme complex of Clostridium cellulovorans. CbpA contains a family III cellulose-binding domain (CBD) which, when expressed independently, binds specifically to crystalline cellulose. A series of N- and C-terminal deletions and a series of small internal deletions of the CBD were created to determine whether the entire region previously described as a CBD is required for the cellulose-binding function. The N- and C-terminal deletions reduced binding affinity by 10- to 100-fold. Small internal deletions of the CBD resulted in substantial reduction of CBD function. Some, but not all, point mutations throughout the sequence had significant disruptive effects on the binding ability of the CBD. Thus, mutations in any region of the CBD had effects on the binding of the fragment to cellulose. The results indicate that the entire 163-amino-acid region of the CBD is required for maximal binding to crystalline cellulose.

• Din N, Damude HG, Gilkes NR, Miller RC Jr, Warren RA, Kilburn DG
• C1-Cx revisited: intramolecular synergism in a cellulase.
• Proc Natl Acad Sci U S A. 1994; 91: 11383-7
• Display abstract

• Endoglucanase A (CenA) from the bacterium Cellulomonas fimi is composed of a catalytic domain and a nonhydrolytic cellulose-binding domain that can function independently. The individual domains interact synergistically in the disruption and hydrolysis of cellulose fibers. This intramolecular synergism is distinct from the well-known intermolecular synergism between individual cellulases. The catalytic domain corresponds to the hydrolytic Cx system and the cellulose-binding domain corresponds to the nonhydrolytic C1 system postulated by Reese et al. [Reese, E. T., Sui, R. G. H. & Levinson, H. S. (1950) J. Bacteriol. 59, 485-497] to be required for the hydrolysis of cellulose.

• Gerwig GJ, Kamerling JP, Vliegenthart JF, Morag E, Lamed R, Bayer EA
• The nature of the carbohydrate-peptide linkage region in glycoproteins from the cellulosomes of Clostridium thermocellum and Bacteroides cellulosolvens.
• J Biol Chem. 1993; 268: 26956-60
• Display abstract

• The cellulase complexes of two cellulolytic bacteria, Clostridium thermocellum and Bacteroides cellulosolvens, were subjected to extensive Pronase digestion. Glycopeptide fractions were isolated by gel permeation and fast protein liquid chromatography and analyzed by monosaccharide analysis, amino acid analysis, methylation analysis, and 1H NMR spectroscopy. Alkaline borohydride-induced deglycosylation/amino acid conversion and periodate oxidation studies on the glycopeptide fraction of the C. thermocellum cellulosome demonstrated that the earlier established collection of carbohydrate moieties with 3-O-Me-D-GlcpNAc-alpha (1-->2)-[D-Galp-alpha (1-->3)]-D-Galf-alpha (1-->2)-D-Gal (where 3-O-Me-D-GlcpNAc is 3-O-methyl-N-acetylglucopyranosamine, Galp is galactopyranose, and Galf is galactofuranose) as the major component, is O-linked to threonine via galactopyranose. Using the same approach for the glycopeptide fraction of the cellulase complex of B. cellulosolvens, it was found that the reported collection of carbohydrate moieties with D-Galf-alpha (1-->3)-D-GlcpNAc-alpha (1-->2)-D-Galf-alpha (1-->2)-[D-Galf-beta (1-->3)]-D-Gal as the major component, is O-linked mainly to threonine and partly to serine via galactopyranose. In both species, the hydroxyamino-acid-bound galactopyranose residue has probably an alpha-configuration. The carbohydrate chains appear as clusters located in highly Thr/Pro-rich peptide regions of the glycoproteins. The results are consistent with the notion that the glycosylation sites are localized in linker sequences which connect the various binding domains of the noncatalytic S1 subunit of the cellulosome.

• Gelhaye E, Petitdemange H, Gay R
• Characteristics of cellulose colonization by a mesophilic, cellulolytic Clostridium (strain C401).
• Res Microbiol. 1992; 143: 891-5
• Display abstract

• Using the technique of incorporation of 3H-thymidine into DNA, we describe colonization properties of an anaerobic, mesophilic, cellulolytic Clostridium, strain C401. This method took into account both bacteria which adhered and those which did not adhere to the substrate. The observed generation time (7.5 h) was faster than that detected (26 h) with other methods. Under the conditions used, the end of growth was characterized by a sharp release of biomass. A depletion in the supply of carbon source and therefore, of the adhesion site, was responsible for this release.

• Gibbs MD, Saul DJ, Luthi E, Bergquist PL
• The beta-mannanase from "Caldocellum saccharolyticum" is part of a multidomain enzyme.
• Appl Environ Microbiol. 1992; 58: 3864-7
• Display abstract

• The complete sequence of a beta-mannanase gene from an anaerobic extreme thermophile was determined, and it shows that the expressed protein consists of two catalytic domains and two binding domains separated by spacer regions rich in proline and threonine residues. The amino-terminal catalytic domain has beta-mannanase activity, and the carboxy-terminal domain acts as an endoglucanase. Neither domain shows homology with any other cellulase or hemicellulase sequence at the nucleic acid or protein level.

• Wood BE, Ingram LO
• Ethanol production from cellobiose, amorphous cellulose, and crystalline cellulose by recombinant Klebsiella oxytoca containing chromosomally integrated Zymomonas mobilis genes for ethanol production and plasmids expressing thermostable cellulase genes from Clostridium thermocellum.
• Appl Environ Microbiol. 1992; 58: 2103-10
• Display abstract

• The Zymomonas mobilis genes for ethanol production have been integrated into the chromosome of Klebsiella oxytoca M5A1. The best of these constructs, strain P2, produced ethanol efficiently from cellobiose in addition to monomeric sugars. Utilization of cellobiose and cellotriose by this strain eliminated the requirement for external beta-glucosidase and reduced the amount of commercial cellulase needed to ferment Solka Floc SW40 (primarily crystalline cellulose). The addition of plasmids encoding endoglucanases from Clostridium thermocellum resulted in the intracellular accumulation of thermostable enzymes as coproducts with ethanol during fermentation. The best of these, strain P2(pCT603T) containing celD, was used to hydrolyze amorphous cellulose to cellobiose and produce ethanol in a two-stage process. Strain P2(pCT603T) was also tested in combination with commercial cellulases. Pretreatment of Solka Floc SW40 at 60 degrees C with endoglucanase D substantially reduced the amount of commercial cellulase required to ferment Solka Floc. The stimulatory effect of the endoglucanase D pretreatment may result from the hydrolysis of amorphous regions, exposing additional sites for attack by fungal cellulases. Since endoglucanase D functions as part of a complex in C. thermocellum, it is possible that this enzyme may complex with fungal enzymes or bind cellulose to produce a more open structure for hydrolysis.

• Cunningham C, McPherson CA, Martin J, Harris WJ, Flint HJ
• Sequence of a cellulase gene from the rumen anaerobe Ruminococcus flavefaciens 17.
• Mol Gen Genet. 1991; 228: 320-3
• Display abstract

• A cellulase gene (endA) was isolated from a library of Ruminococcus flavefaciens strain 17 DNA fragments inserted in pUC13. The endA product showed activity against acid-swollen cellulose, carboxymethyl-cellulose, lichenan, cellopentaose and cellotetraose, but showed no activity against cellotriose or binding to avicel. Nucleotide sequencing indicated an encoded product of 455 amino acids which showed significant sequence similarity (ranging from 56% to 61%) with three endoglucanases from Ruminococcus albus, and with Clostridium thermocellum endoglucanase E. Little relatedness was found with a cellodextrinase previously isolated from R. flavefaciens FD1.

• Morag E, Halevy I, Bayer EA, Lamed R
• Isolation and properties of a major cellobiohydrolase from the cellulosome of Clostridium thermocellum.
• J Bacteriol. 1991; 173: 4155-62
• Display abstract

• In the anaerobic, thermophilic, cellulolytic bacterium Clostridium thermocellum, efficient solubilization of the insoluble cellulose substrate is accomplished largely through the action of a cellulose-binding multienzyme complex, the cellulosome. A major cellobiohydrolase activity from the cellulosome has been traced to its Mr 75,000 S8 subunit, and an active fragment of this subunit was prepared by a novel procedure involving limited proteolytic cleavage. The truncated Mr 68,000 fragment, termed S8-tr, was purified by gel filtration and high-performance ion-exchange chromatography. The purified protein adsorbed weakly to amorphous cellulose, and its enzymatic action yielded cellobiose as the major end product from both amorphous and crystalline cellulose preparations. The high ratio of exo- to endo-beta-glucanase activities was supported by viscosimetric measurements. The use of model substrates showed that the smallest cellodextrin to be degraded was cellotetraose, but cellopentaose was degraded at a much greater rate. Cellobiose dramatically inhibited the cellulolytic activities. In the absence of calcium or other bivalent metal ions, both the truncated cellobiohydrolase activity of S8-tr and the true cellulase activity of the parent cellulosome were relatively unstable at temperatures above 50 degrees C. Cysteine further enhanced the stabilizing effect of calcium. This is the first report of a defined cellobiohydrolase in C. thermocellum. Its association with the cellulosome and the correspondence of several of their major distinctive properties suggest that this cellobiohydrolase plays a key role in the solubilization of cellulose by the intact cellulosomal complex.

• Klyosov AA
• Trends in biochemistry and enzymology of cellulose degradation.
• Biochemistry. 1990; 29: 10577-85

• Kraulis J et al.
• Determination of the three-dimensional solution structure of the C-terminal domain of cellobiohydrolase I from Trichoderma reesei. A study using nuclear magnetic resonance and hybrid distance geometry-dynamical simulated annealing.
• Biochemistry. 1989; 28: 7241-57
• Display abstract

• The solution structure of a synthetic 36-residue polypeptide comprising the C-terminal cellulose binding domain of cellobiohydrolase I (CT-CBH I) from Trichoderma reesei was investigated by nuclear magnetic resonance (NMR) spectroscopy. The 1H NMR spectrum was completely assigned in a sequential manner by two-dimensional NMR techniques. A large number of stereospecific assignments for beta-methylene protons, as well as ranges for the phi, psi, and chi 1 torsion angles, were obtained on the basis of sequential and intraresidue nuclear Overhauser enhancement (NOE) and coupling constant data in combination with a conformational data base search. The structure calculations were carried out in an iterative manner by using the hybrid distance geometry-dynamical simulated annealing method. This involved computing a series of initial structures from a subset of the experimental data in order to resolve ambiguities in the assignments of some NOE cross-peaks arising from chemical shift degeneracy. Additionally, this permitted us to extend the stereospecific assignments to the alpha-methylene protons of glycine using information on phi torsion angles derived from the initial structure calculations. The final experimental data set consisted of 554 interproton distance restraints, 24 restraints for 12 hydrogen bonds, and 33 phi, 24 psi, and 25 chi 1 torsion angle restraints. CT-CBH I has two disulfide bridges whose pairing was previously unknown. Analysis of structures calculated with all three possible combinations of disulfide bonds, as well as without disulfide bonds, indicated that the correct disulfide bridge pairing was 8-25 and 19-35. Forty-one structures were computed with the 8-25 and 19-35 disulfide bridges, and the average atomic rms difference between the individual structures and the mean structure obtained by averaging their coordinates was 0.33 +/- 0.04 A for the backbone atoms and 0.52 +/- 0.06 A for all atoms. The protein has a wedgelike shape with an amphiphilic character, one face being predominantly hydrophilic and the other mainly hydrophobic. The principal element of secondary structure is made up of an irregular triple-stranded antiparallel beta-sheet composed of residues 5-9 (beta 1), 24-28 (beta 2), and 33-36 (beta 3) in which strand beta 3 is hydrogen bonded to the other two strands.(ABSTRACT TRUNCATED AT 400 WORDS)

• Hovmoller S, Sjogren A, Wang DN
• The structure of crystalline bacterial surface layers.
• Prog Biophys Mol Biol. 1988; 51: 131-63

• Beguin P, Millet J, Aubert JP
• The cloned cel (cellulose degradation) genes of Clostridium thermocellum and their products.
• Microbiol Sci. 1987; 4: 277-80
• Display abstract

• More than 10 cel genes of Clostridium thermocellum were cloned and expressed in Escherichia coli. Four of them, celA, celB, celC and celD, were studied in detail. The corresponding endoglucanases were purified from E. coli and characterized. The over-produced endoglucanase D, purified from cytoplasmic granules, was crystallized.

• Mayer F, Coughlan MP, Mori Y, Ljungdahl LG
• Macromolecular Organization of the Cellulolytic Enzyme Complex of Clostridium thermocellum as Revealed by Electron Microscopy.
• Appl Environ Microbiol. 1987; 53: 2785-92
• Display abstract

• Clostridium thermocellum JW20 and YM4 both synthesize cellulolytic enzyme complexes, cellulosomes, when grown on medium containing cellulose. Electron microscopic studies showed that, in the early stages of growth of strain JW20, clusters of tightly packed cellulosomes, i.e., polycellulosomes, were located on the cell surface and were bound to cellulose. The polycellulosome was estimated to have a particle mass of 50 x 10 to 80 x 10 daltons (Da), while that of the cellulosome was estimated to be 2 x 10 to 2.5 x 10 Da and to contain about 35 polypeptides ranging from 20 to 200 kDa. The cellulosome produced by strain YM4 was found to be somewhat larger, with the estimated particle mass being 3.5 x 10 Da, and the number of polypeptides was counted to be 45 to 50, ranging from 20 to 200 kDa. In the early stages of cultivation, the cellulosomes from both species exist as tightly packed complexes (tight cellulosomes). These subsequently decompose to loosely packed complexes (loose cellulosomes) and ultimately to free polypeptides. Examination of the loose cellulosomal particles showed that they contain rows of equidistantly spaced, similarly sized polypeptide subunits, with an apparently identical orientation arranged parallel to the major axis of the cellulosome. It is postulated that on binding of a cellulose chain alongside such a row of subunits a simultaneous multicutting event occurs that leads to the release of cellooligosaccharides of four cellobiose units in length (C(4)). Rows of smaller-sized subunits with lower center-to-center distances, which are also present in the cellulosome, subsequently cleave the C(4) fragments (or cellulose) to C(2) (cellotetraose) or C(1) (cellobiose). In this way the cellulosome can catalyze the complete hydrolysis of cellulose.

• Bayer EA, Lamed R
• Ultrastructure of the cell surface cellulosome of Clostridium thermocellum and its interaction with cellulose.
• J Bacteriol. 1986; 167: 828-36
• Display abstract

• The ultrastructural distribution of the cellulosome (a cellulose-binding, multicellulase-containing protein complex) on the cell surface of Clostridium thermocellum YS was examined by cytochemical techniques and immunoelectron microscopy. When cells of the bacterium were grown on cellobiose, cellulosome complexes were compacted into quiescent exocellular protuberant structures. However, when the same cells were grown on cellulose, these polycellulosomal organelles underwent extensive structural transformation; after attachment to the insoluble substrate, the protuberances protracted rapidly to form fibrous "contact corridors." The contact zones mediated physically between the cellulosome (which was intimately attached to the cellulose matrix) and the bacterial cell surface (which was otherwise detached from its substrate). In addition, cell-free cellulosome clusters coated the surface of the cellulose substrate. The cellulose-bound cellulosome clusters appear to be the site of active cellulolysis, the products of which are conveyed subsequently to the cell surface via the exocellular contact zones.

• Beguin P, Cornet P, Aubert JP
• Sequence of a cellulase gene of the thermophilic bacterium Clostridium thermocellum.
• J Bacteriol. 1985; 162: 102-5
• Display abstract

• The nucleotide sequence of the celA gene, encoding the extracellular endoglucanase A of Clostridium thermocellum, was determined and compared with the NH2-terminal amino acid sequence of the purified enzyme. The mature protein appeared to be extended by a signal sequence of 32 amino acids. A segment of 23 amino acids was duplicated at the COOH-terminal end of the protein. The putative GUG initiation codon was preceded by an AGGAGG sequence, typical of procaryotic ribosomal binding sites. The segment of DNA presumably specifying transcriptional initiation contained a high percentage of adenine and thymine residues, including an adenine-thymine tract extending over 54 base pairs.

• Bender J, Vatcharapijarn Y, Jeffries TW
• Characteristics and Adaptability of Some New Isolates of Clostridium thermocellum.
• Appl Environ Microbiol. 1985; 49: 475-7
• Display abstract

• Six strains of Clostridium thermocellum isolated from various environments were characterized as to growth rate, production of reducing sugars, ethanol, and acetic acid from cellulose, base composition of DNA, and the abilities to adapt to ethanol and to grow at 45 degrees C. Five of the six new isolates produced 7 to 15% more ethanol and two produced about 45% more reducing sugars than a standard reference strain. One strain (MC-6) adapted more readily to growth in 2% ethanol than the others.

• Le Ruyet P, Dubourguier HC, Albagnac G
• Homoacetogenic Fermentation of Cellulose by a Coculture of Clostridium thermocellum and Acetogenium kivui.
• Appl Environ Microbiol. 1984; 48: 893-4
• Display abstract

• Interrelationships between methanogens and fermentative or hydrolytic bacteria are well documented; however, such cocultures do not allow a complete fermentation shift to a peculiar metabolite. We describe here a new stable association between Clostridium thermocellum and Acetogenium kivui which converts 1 mol of cellulose (anhydroglucose equivalent) into 2.7 mol of acetate.

• SVEDBERG T
• The cellulose molecule; physical-chemical studies.
• J Phys Colloid Chem. 1947; 51: 1-18

• ASCHNER M, HESTRIN S
• Fibrillar structure of cellulose of bacterial and animal origin.
• Nature. 1946; 157: 659-659

© 2021 EMBL | Privacy Policy